Beatbot AquaSense 2 Pro Robotic Pool Cleaner

ምርት አልቋልview

The Beatbot AquaSense 2 Pro is a cordless robotic pool cleaner designed for comprehensive pool maintenance. It offers unmatched 5-in-1 cleaning power, covering every pool surface: floor, walls, waterline, and water surface, while also clarifying the water. This device is engineered to save time and effort, providing an exceptional pool care experience.

Equipped with advanced CleverNav technology, a 4-core CPU, and 22 sensors, the AquaSense 2 Pro optimizes cleaning paths, navigates obstacles, and ensures thorough cleaning in S/N patterns. Its dual-layer filter captures debris from large leaves to tiny particles (150µm), minimizing maintenance with an anti-blockage design.

Figure 1: 5-in-1 Cleaning Capabilities

ምን ይካተታል

ቦክስ ሲወጡ ሁሉም ክፍሎች መኖራቸውን ያረጋግጡ፡-

• 1 x AquaSense 2 Pro Robotic Pool Cleaner
• 1 x የኃይል መሙያ መትከያ
• 1 x Clarifying Agent Kit
• 1 x Hook (for retrieval)
• 1 x Dual Filter Basket
• 1 x ፈጣን ጅምር መመሪያ
• 1 x የተጠቃሚ መመሪያ

Figure 2: AquaSense 2 Pro and Charging Dock

ማዋቀር

1. Setting up the Charging Dock

Assemble the charging dock by attaching the two plastic feet. Place the charging dock on a flat, stable surface, away from direct sunlight and moisture. Ensure the charging cable is securely connected to a power outlet.

Figure 3: Charging Dock Assembly

2. Initial Robot Charge

Place the AquaSense 2 Pro onto the charging dock. A breathing green light indicates that the robot is charging. Allow the robot to fully charge before its first use (approximately 4 hours).

3. Clarifying Agent Kit Installation

The clarifying agent kit is an optional feature. To install, open the designated compartment on the robot's top surface, peel off the aluminum seal from the clarifying agent solution box, and pop it into the compartment. Close the lid securely.

Figure 4: Clarifying Agent Installation

4. የአውታረ መረብ ግንኙነት

To connect your robot to the network, ensure your robot is powered on. Press and hold the "Power" and "Floor Mode" buttons simultaneously for about 3 seconds until the indicator light flashes blue. Then, use the Beatbot app to complete the connection via Bluetooth, QR code, or manual add. Ensure your phone is within 1 meter of the robot and supports both 2.4GHz and 5GHz WiFi.

Video 1: Before Cleaning How to Set Up-AquaSense 2 Pro. This video demonstrates the initial setup process, including connecting the robot to your network.

ማጽጃውን በመሥራት ላይ

The AquaSense 2 Pro offers multiple cleaning modes to suit various pool needs:

• የወለል ሁነታ: የመዋኛ ገንዳውን ወለል ብቻ ያጸዳል።
• መደበኛ ሁነታ፡ Cleans floor, walls, and waterline.
• ፕሮ ሁነታ፡ Comprehensive cleaning of floor, walls, waterline, and water surface, with water clarification.
• ብጁ ሁነታ Allows you to adjust cleaning areas and duration via the app.
• ኢኮ ሁነታ፡ Cleans the pool floor every 2 days. The robot will park itself at the pool edge when done or low on battery.

App Control and Surface Navigation

Utilize the Beatbot app for precise control. You can select and customize cleaning modes, monitor water and environmental temperatures, view cleaning history, and receive real-time status updates. The app also allows for remote navigation of the cleaner across the pool's surface, enabling you to target stubborn floating debris and direct the robot to the edge for easy pickup.

ምስል 5፡ የመተግበሪያ መቆጣጠሪያ በይነገጽ

Smart Parking & Drainage

The robot automatically returns to the pool edge and parks above water when its cleaning cycle is complete or when the battery is low. The SmartDrain feature releases water from the unit, making retrieval lighter and easier, eliminating the need for heavy lifting.

Figure 6: Smart Parking and Drainage

Video 2: Clean smarter, relax deeper-fans = AquaSense 2 Pro. This video highlights the efficiency and ease of use of the cleaner.

ጥገና

የማጣሪያ ቅርጫት ማጽዳት

Regularly clean the dual-layer filter basket to maintain optimal cleaning performance. Always turn off the device before cleaning the filters to prevent any electrical hazards. The anti-blockage design minimizes maintenance, but periodic cleaning is essential.

Figure 7: Filter Basket Cleaning

መላ መፈለግ

If you encounter issues with your AquaSense 2 Pro, consider the following common solutions:

• የግንኙነት ጉዳዮች፡- Ensure the robot is powered on and within WiFi range. Restarting the app or the robot can often resolve connection problems.
• Suboptimal Cleaning: Verify the filter basket is clean and properly installed. Ensure the robot is operating in the correct mode for your pool's needs (e.g., Pro mode for full coverage).
• Shallow Areas/Ledges: For pools with steps or shallow ledges, ensure the MultiZone App Mode is activated via the app to ensure seamless coverage.
• Retrieval Difficulty: Utilize the SmartDrain feature to release water from the robot before lifting it out of the pool.

ዝርዝሮች

ዋስትና እና ድጋፍ

The Beatbot AquaSense 2 Pro comes with a 3-Year Full Replacement Protection. This industry-leading warranty ensures full machine replacement instead of repairs, providing peace of mind.

For additional support, refer to the included User Manual or visit the Beatbot website. Beatbot is committed to providing world-class support for an exceptional pool care experience.