AMPAI WiFi Wall Touch Smart Switch User Manual

1. መግቢያ

ስለመረጡ እናመሰግናለን AMPAI WiFi Wall Touch Smart Switch. This smart switch is designed to upgrade your home lighting control with advanced features and convenience. It offers multiple control methods including touch panel, RF433 remote, and voice control via Alexa and Google Home. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance and safety.

ምስል 1፡ AMPAI WiFi Wall Touch Smart Switch (4 Gang) and included RF433 Remote.

2. ጠቃሚ የደህንነት መረጃ

• የኤሌክትሪክ ደህንነት; Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical systems. Always turn off power at the circuit breaker before installation or maintenance.
• ተኳኋኝነት This switch is designed for standard on/off control only. It is NOT compatible with dimmable bulbs or fixtures. Attempting to use it with dimmable bulbs may cause damage to the bulbs or the switch.
• የዋይፋይ አውታረ መረብ፡ The smart switch operates on a 2.4GHz Wi-Fi network only. It is not compatible with 5GHz Wi-Fi networks. Ensure your router supports 2.4GHz.
• ሽቦ ማድረግ፡ This switch supports both neutral wire and no neutral wire (single fire) installations. Refer to the wiring diagrams carefully.
• Not a Traditional 3-Way Switch: While it offers 3-way control via multi-control methods (app, remote, voice), it does not function as a traditional mechanical 3-way switch requiring traveler wires between two switches.

Figure 2: Key attention points regarding 2.4GHz WiFi, wiring, and non-compatibility with traditional 3-way or dimmable setups.

3. የጥቅል ይዘቶች

እባክዎ ሁሉም እቃዎች መኖራቸውን እና ያልተበላሹ መሆናቸውን ለማረጋገጥ የጥቅሉን ይዘቶች ሲከፍቱ ያረጋግጡ፡

• AMPAI WiFi Wall Touch Smart Switch (4 Gang)
• ሃርድዌር ማፈናጠጥ (ስክረ)
• RF433 Remote Control (if included in your specific package)
• የተጠቃሚ መመሪያ (ይህ ሰነድ)

4. ማዋቀር እና መጫን

4.1 የሽቦ መመሪያዎች

WARNING: Ensure power is OFF at the circuit breaker before beginning any wiring.

This smart switch supports two wiring methods: with a neutral wire or without a neutral wire (single fire). Identify your home's wiring configuration before proceeding.

Figure 3: Wiring diagrams for Neutral and Fire Line (left) and Single Fire (right) installations. A capacitor is required for single fire wiring.

1. ኃይል ያጥፉ; የመብራት ማብሪያ / ማጥፊያውን የሚቆጣጠረውን ወረዳውን ይፈልጉ እና ያጥፉት። ጥራዝ በመጠቀም ኃይል መጥፋቱን ያረጋግጡtagሠ ሞካሪ።
2. የድሮውን ማብሪያ / ማጥፊያ ያስወግዱ፦ Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires.
3. ሽቦዎችን መለየት፦ Identify the Live (Line), Load, and Neutral wires (if present). For single fire wiring, you will only have Live and Load.
4. ስማርት ማብሪያ/ማጥፊያውን በሽቦ ያስተካክሉ፦
   • Neutral and Fire Line Wiring: Connect the Live wire to the 'L' terminal, the Neutral wire to the 'N' terminal, and the Load wires to the 'L1', 'L2', 'L3', 'L4' terminals corresponding to your light circuits.
   • Single Fire Wiring: Connect the Live wire to the 'L' terminal and the Load wires to the 'L1', 'L2', 'L3', 'L4' terminals. A capacitor must be connected across the Live and Load wires of the light fixture for stable operation.
5. መቀየሪያውን ይጫኑ፡ Secure the smart switch into the wall box using the provided screws. Attach the glass panel.
6. ኃይልን ወደነበረበት መመለስ; በወረዳው ሰባሪው ላይ ኃይሉን መልሰው ያብሩት።

4.2 App Installation and Pairing (Tuya Smart Life)

1. መተግበሪያ ያውርዱ "ስማርት ላይፍ" ወይም "ቱያ ስማርት" የሚለውን መተግበሪያ ከመተግበሪያ መደብር (iOS) ወይም ከጉግል ፕሌይ መደብር (አንድሮይድ) ያውርዱ።
2. ይመዝገቡ/ይግቡ፡ መተግበሪያውን ይክፈቱ እና አዲስ መለያ ይመዝገቡ ወይም አስቀድመው ካለዎት ይግቡ።
3. መሣሪያ አክል፡
   • ስልክዎ ከ2.4GHz Wi-Fi አውታረ መረብ ጋር መገናኘቱን ያረጋግጡ።
   • በመተግበሪያው ውስጥ፣ መሳሪያ ለማከል በላይኛው ቀኝ ጥግ ላይ ያለውን የ"+" አዶን መታ ያድርጉ።
   • Select "Electrical Switch" or "Wall Switch" from the device list.
   • Follow the on-screen instructions to put the switch into pairing mode (usually by pressing and holding a button on the switch until an indicator light blinks rapidly).
   • Confirm the indicator light is blinking rapidly in the app and enter your Wi-Fi password.
   • መተግበሪያው ከስዊች ጋር ይገናኛል። አንዴ ከተገናኘ በኋላ፣ ስዊችውን እንደገና መሰየም እና ለክፍል መመደብ ይችላሉ።

4.3 RF433 Remote Pairing

The included RF433 remote can be paired directly with the switch for local control without Wi-Fi.

1. የማጣመሪያ ሁነታን ያስገቡ ፦ On the smart switch, press and hold the touch button you wish to pair for approximately 5-7 seconds until you hear a "beep" sound or see a small indicator light flash.
2. የርቀት መቆጣጠሪያ አዝራሩን ይጫኑ፦ Within 3 seconds, press the corresponding button (A, B, or C) on the RF433 remote.
3. ማረጋገጫ፡- The switch will "beep" again or the light will stop flashing, indicating successful pairing.

5. ስማርት ስዊችን በማስኬድ ላይ

5.1 የንክኪ ቁጥጥር

Simply touch the corresponding icon on the glass panel to turn the connected light ON or OFF.

Figure 4: The smart switch supports multiple control methods for convenience.

5.2 Smart Life / Tuya App Control

Open the Smart Life or Tuya Smart app on your smartphone. From the device list, tap on your smart switch to access its control interface. You can turn lights ON/OFF, set schedules, and create scenes from anywhere with an internet connection.

5.3 የድምጽ ቁጥጥር (አሌክሳ እና ጉግል ሆም)

የ AMPAI Smart Switch is compatible with Amazon Alexa and Google Home for convenient voice control.

1. አገናኝ መለያ፡ In the Alexa or Google Home app, enable the "Smart Life" or "Tuya Smart" skill/action and link your Smart Life/Tuya account.
2. መሣሪያዎችን ያግኙ ፦ Ask Alexa or Google Home to "Discover devices" or manually add them through the app.
3. የድምጽ ትዕዛዞች፡- አንዴ ከተገኘ በኋላ የሚከተሉትን ትዕዛዞች መጠቀም ይችላሉ፦
   • "Alexa, turn on [Light Name]"
   • "Hey Google, turn off [Light Name]"
   • "Alexa, set [Light Name] to 50%" (Note: This switch does not support dimming, so dimming commands will not work.)

Figure 5: Enjoy hands-free control with Amazon Alexa and Google Assistant.

5.4 RF433 የርቀት መቆጣጠሪያ

Use the paired RF433 remote to control the switch from a distance. Each button (A, B, C) on the remote can be paired to control a specific gang or group of gangs on the switch.

Figure 6: The RF433 remote provides an additional convenient control method.

5.5 Timer and Scene Functions

Utilize the Smart Life/Tuya app to set schedules and create custom scenes for your lighting. For example, you can set lights to turn on at sunset or off at a specific time, or create a "Movie Night" scene that turns off certain lights.

Figure 7: Set timers and scenes for automated lighting control.

6. ጥገና

የ AMPAI Smart Switch requires minimal maintenance. To keep it clean and functioning properly:

• ማጽዳት፡ Gently wipe the glass panel with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they may damage the surface.
• የኃይል ዑደት፡- If the switch becomes unresponsive, try turning off the power at the circuit breaker for 10 seconds, then turning it back on.
• የጽኑዌር ዝማኔዎች ፦ Periodically check the Smart Life/Tuya app for any available firmware updates for your switch to ensure optimal performance and security.

7. መላ መፈለግ

8. ዝርዝሮች

9. ዋስትና እና ድጋፍ

For warranty information and technical support, please contact AMPAI customer service. You can often find support contact details on the product packaging, the manufacturer's official website, or through your purchase platform (e.g., Amazon).

አምራች፡ AMPAI

ለተጨማሪ እርዳታ፣ እባክዎን ይጎብኙ AMPAI Store on Amazon.