1. መግቢያ
Thank you for choosing the ALUSSO Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.
Image: ALUSSO 30W LED Security Light installed on a house, illuminating the front yard.
2. የደህንነት መረጃ
ማስጠንቀቂያ፡ የኤሌክትሪክ ንዝረት አደጋ። ከመጫንዎ ወይም ከማገልገልዎ በፊት ኃይልን በ fuse ወይም circuit breaker ያላቅቁ።
- ይህ ምርት በሚመለከተው የመጫኛ ኮድ መሰረት የምርቱን ግንባታ እና አሰራር እና አደጋን የሚያውቅ ሰው መጫን አለበት።
- Use only supplied accessories for installation.
- Ensure the balancing mechanism is secure after installation.
- ምርቱን አይቀይሩ ወይም አይቀይሩት።
- ተቀጣጣይ ቁሶች አጠገብ አይጫኑ.
- This fixture is Class II safety-rated and does not require a ground wire.
3. የጥቅል ይዘቶች
ከመጫኑ በፊት ሁሉም አካላት መኖራቸውን እና ያልተበላሹ መሆናቸውን ያረጋግጡ።
Image: Diagram showing the ALUSSO flood light components and included accessories for installation.
- ALUSSO Motion Sensor Outdoor Flood Light Unit (1)
- የመጫኛ ቅንፍ (1)
- Screws and Wall Anchors (Set)
- Wire Connectors (Yellow Quick-Connects) (Set)
- Waterproof Gasket (1)
- መመሪያ መመሪያ (1)
- የዋስትና ካርድ (1)
4. ምርት አብቅቷልview
The ALUSSO WL-YDR-230P is a versatile and durable outdoor security light designed to provide powerful illumination and enhanced safety for your property.
ምስል፡ አልቋልview of ALUSSO 30W LED Security Light features.
- Power & Brightness: 30W, 3500 Lumens, covering up to 2000 sq. ft.
- የቀለም ሙቀት (3CCT): Adjustable between 3000K (Warm White), 4000K (Natural White), and 6500K (Daylight).
- Operating Modes (3 Modes): Dusk to Dawn (D2D), Auto (Motion Mode), and On Time (Always On).
- የእንቅስቃሴ ዳሳሽ፡- 150° wide-angle detection with an adjustable range of 1-40 ft.
- የሚስተካከሉ ጭንቅላቶች; Dual adjustable light heads provide a 100° beam angle, allowing precise light direction.
- ዘላቂነት፡ IP65 waterproof rating, UV resistant, and cold resistant for all-weather performance.
- ደህንነት፡ Class II safety-rated, requiring no ground wire.
5. ማዋቀር እና መጫን
This flood light is designed for hardwired installation. Ensure power is disconnected before proceeding.
- ኃይል አጥፋ፡ Locate the circuit breaker controlling the light fixture and turn off the power.
- ሽቦ ማዘጋጀት; If replacing an existing fixture, carefully remove it. Ensure the existing wires (Live and Neutral) are accessible.
- የመጫኛ ቅንፍ ጫን Attach the provided mounting bracket to your standard 3" or 3.5" round junction box. Use the appropriate screws and anchors for your mounting surface (wall or soffit).
- ሽቦዎችን ማገናኘት; Use the yellow quick-connect terminals to securely connect the light's wires to your household wiring. Connect the white wire from the fixture to the neutral wire, and the black wire from the fixture to the live wire. This is a Class II fixture, so no ground wire connection is needed.
- አባሪ አያይዝ፡ Carefully align the flood light unit with the mounting bracket. Ensure the waterproof gasket is properly seated between the fixture and the mounting surface to prevent moisture ingress. Secure the fixture with the provided screws.
- የብርሃን ጭንቅላትን ማስተካከል; Loosen the wing nuts on the light heads to adjust their angle and direction as needed. Tighten the wing nuts to secure the position.
- የሚመከር የመጫኛ ቁመት፡- For optimal sensor performance, install the light at a height of 6.56-9.84 feet (2-3 meters).
Image: Installation steps for the ALUSSO flood light.
Image: Soffit Mounted and Wall Mounted configurations.
6. የአሠራር መመሪያዎች
Your ALUSSO flood light offers adjustable settings for optimal performance.
6.1. Color Temperature (CCT) Adjustment
A dip switch located on the back of the light fixture allows you to select the desired color temperature:
Image: 3 CCT options: Warm White (3000K), Natural White (4000K), and Daylight (6500K).
- WW (ሙቅ ነጭ) 3000 ኪ
- NW (Natural White): 4000 ኪ
- CW (Daylight): 6500 ኪ
Note: Adjust the CCT switch before mounting the fixture for easier access.
6.2. የክወና ሁነታ ምርጫ
A dip switch on the back of the motion sensor unit allows you to select one of three operating modes:
Image: Three work modes of the ALUSSO flood light.
- D2D Mode (Dusk to Dawn): The light automatically turns on at sunset and turns off at sunrise. The motion sensor is inactive in this mode.
- AUTO Mode (Motion Mode): The light activates when motion is detected within its range. It turns off after a set duration if no further motion is detected.
- ON TIME Mode (Always On): The light is manually controlled via the wall switch. The motion sensor is disabled, and the light remains on until manually switched off.
6.3. Auto Mode Adjustments
When in AUTO Mode, three knobs on the bottom of the motion sensor allow for fine-tuning:
Image: Motion sensor with LUX, SENS, and TIME adjustment knobs.
- LUX (Brightness Sensitivity): Adjusts the ambient light level at which the motion sensor becomes active. Turn towards the sun icon for day and night operation, or towards the moon icon for night-only operation (5-2000 LUX).
- SENS (Detection Range): Controls the sensitivity and detection distance of the motion sensor (1-40 ft).
- ጊዜ (ቆይታ): Sets how long the light remains on after motion is detected and no further motion is sensed (10 seconds to 10 minutes).
Video: Official ALUSSO product video demonstrating features and modes.
7. ጥገና
To ensure the longevity and optimal performance of your ALUSSO flood light, follow these maintenance guidelines:
- ማጽዳት፡ በየጊዜው እቃውን ለስላሳ, መamp ጨርቅ. የማጠናቀቂያውን ወይም የኤሌትሪክ ክፍሎችን ሊጎዱ ስለሚችሉ ሻካራ ማጽጃዎችን ወይም ፈሳሾችን አይጠቀሙ።
- ምርመራ፡- የጉዳት፣ የተላቀቁ ግንኙነቶች ወይም የመበስበስ ምልክቶች ካሉ መሳሪያውን በየጊዜው ይፈትሹ። ማንኛውንም ችግር ወዲያውኑ ይፍቱ።
- የአነፍናፊ ጽዳት; Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebሰ) ትክክለኛ ምርመራን ለማረጋገጥ.
Image: ALUSSO flood light is durable in all weather conditions.
8. መላ መፈለግ
If you experience issues with your flood light, refer to the following common problems and solutions:
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| መብራት አይበራም ፡፡ | No power, incorrect wiring, mode setting. | Check circuit breaker. Verify wiring connections. Ensure correct operating mode is selected. |
| የእንቅስቃሴ ዳሳሽ አላገኘም። | Incorrect SENS/LUX settings, obstructions. | Adjust SENS to maximum. Adjust LUX towards sun icon. Clear any obstructions from sensor's view. |
| ብርሃን ያለማቋረጥ እንደበራ ይቆያል። | TIME setting too long, continuous motion, D2D mode selected. | Adjust TIME to a shorter duration. Ensure no constant motion in detection zone. Switch to AUTO mode if D2D is not desired. |
| ብርሃን ብልጭ ድርግም ይላል. | Loose wiring, unstable power. | Check all wire connections for tightness. Consult an electrician if power supply is unstable. |
9. ዝርዝሮች
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| የሞዴል ስም | 30W Flood Lights Outdoor Motion Sensor |
| ክፍል ቁጥር | WL-YDR-230P |
| ዋትtage | 30 ዋት |
| ብሩህነት | 3500 Lumens |
| የቀለም ሙቀት | 3000K/4000K/6500K (Adjustable) |
| ጥራዝtage | 120 ቮልት (ኤሲ) |
| የእንቅስቃሴ ማወቂያ አንግል | 150° |
| የእንቅስቃሴ ማወቂያ ክልል | 1-40 ft (Adjustable) |
| Light Duration (Auto Mode) | 10 seconds - 10 minutes (Adjustable) |
| የውሃ መቋቋም ደረጃ | IP65 የውሃ መከላከያ |
| የቤት ውስጥ / የውጭ አጠቃቀም | ከቤት ውጭ |
| የመጫኛ ዓይነት | Hardwired, Wall Mount/Soffit Mount |
| የምርት ልኬቶች | 9.45"ኤል x 6.9" ዋ x 5.12" ኤች |
| የእቃው ክብደት | 1.52 ፓውንድ (0.69 ኪሎግራም) |
| አማካይ ህይወት | 30000 ሰዓታት |
| የደህንነት ደረጃ | ETL Listed, Class II (no ground wire required) |
10. ዋስትና እና ድጋፍ
ALUSSO provides a የ 3 ዓመት ዋስትና for this product, as indicated on the packaging. Additionally, a 5-year manufacturer's coverage is offered, ensuring repair or replacement for any defects in materials or workmanship under normal use.
For any inquiries, technical support, or warranty claims, please contact ALUSSO customer service:
- ኢሜይል፡- service-support@alussolighting.com
- Webጣቢያ፡ www.alussolighting.com
