የVTOMAN V3 Pro 2000A የዝላይ ማስጀመሪያ የተጠቃሚ መመሪያ

1. ምርት አብቅቷልview

The VTOMAN V3 Pro is a portable and compact car battery jump starter designed to provide reliable power for various vehicles. It also functions as a power bank and an emergency LED light, making it a versatile tool for automotive and outdoor use.

Image: The VTOMAN V3 Pro jump starter unit with its smart jumper cables attached, ready for use.

1.1 በሳጥኑ ውስጥ ያለው

Image: A visual representation of all items included in the VTOMAN V3 Pro jump starter kit.

• 1 x VTOMAN V3 Pro Car Jump Starter
• 1 x ስማርት ጃምፐር ኬብሎች
• 1 x ዓይነት-C የዩኤስቢ ባትሪ መሙያ ገመድ
• 1 x ተሸካሚ ቦርሳ
• 1 x የተጠቃሚ መመሪያ

1.2 የምርት ንድፍ

Image: A detailed diagram highlighting the various ports and features of the VTOMAN V3 Pro jump starter, including the power switch, electricity indicator, 12V jumper cable interface, LED flashlight, Type-C input port, USB output port, and integrated compass.

• የኃይል መቀየሪያ ክፍሉን ያነቃቃል እና ያቦዝናል።
• የኤሌክትሪክ አመልካች፡ የአሁኑን የባትሪ ኃይል መሙያ ደረጃ ያሳያል።
• 12V Jumper Cable Interface: Port for connecting the smart jumper cables.
• የ LED የእጅ ባትሪ; ማብራት በበርካታ ሁነታዎች ያቀርባል.
• 5V/2A Type-C Input Port: የዝላይ ማስጀመሪያ አሃድ ለመሙላት።
• 5V/2.1A USB Output Port: ውጫዊ መሳሪያዎችን ለመሙላት.
• የተቀናጀ ኮምፓስ፡ ለአሰሳ እርዳታ።

2. የደህንነት መረጃ

Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

2.1 አጠቃላይ የደህንነት ጥንቃቄዎች

• ምርቱን ለዝናብ ወይም ለዝናብ ሁኔታ አያጋልጡ ፡፡
• Do not operate the product if it has been damaged.
• ልጆች በማይደርሱበት ቦታ ያስቀምጡ.
• በሚጠቀሙበት እና በሚሞሉበት ጊዜ ትክክለኛውን አየር ማናፈሻን ያረጋግጡ።
• Do not short-circuit the jumper clamps.
• ሁልጊዜ ፖዘቲቭ (+) cl ን ያገናኙamp to the positive (+) terminal and the negative (-) clamp ወደ አሉታዊ (-) ተርሚናል.
• Disconnect the jumper cables from the jump starter before disconnecting from the vehicle battery.

2.2 Intelligent Safety Protections

The VTOMAN V3 Pro is equipped with 10 intelligent safety protection technologies to ensure safe operation:

Image: An illustration detailing the 10 intelligent safety protections integrated into the VTOMAN V3 Pro jump starter, including over-charge, reverse-polarity, short-circuit, over-current, AI software, spark-proof, over-load, high and low-temperature, over-voltage, and reverse charge protection.

• Anti-Spark Protection: በግንኙነት ወቅት ብልጭታዎችን ይከላከላል።
• Reverse Charging Protection: ወደ ዝላይ ጀማሪው የሚፈሰውን ጅረት ይከላከላል።
• ወቅታዊ ጥበቃ፡- ከመጠን በላይ የሆነ የጅረት ፍሰትን ይከላከላል።
• ከመጠን በላይ ጭነት መከላከያ; Prevents battery damage from overcharging.
• ተገላቢጦሽ የዋልታነት ጥበቃ Alerts and protects against incorrect clamp ግንኙነቶች.
• ከፍተኛ የሙቀት መከላከያ Shuts down if internal temperature exceeds safe limits.
• ዝቅተኛ የሙቀት መከላከያ በቀዝቃዛ የአየር ሁኔታ ደህንነቱ የተጠበቀ አሠራርን ያረጋግጣል።
• የአጭር ዙር ጥበቃ፡- በአጭር ዑደት ምክንያት የሚደርስ ጉዳትን ይከላከላል።
• ከመጠን በላይ መጨናነቅtagሠ ጥበቃ፡ ከመጠን በላይ ውፍረትን ይከላከላልtage.
• ከመጠን በላይ መጫን ጥበቃ; ከመጠን በላይ ኃይልን ከመሳብ ጉዳትን ይከላከላል.

If the jumper cable indicator shows a red light, it indicates an incorrect connection or a safety issue. Correct the connection before proceeding.

3. ማዋቀር እና መሙላት

3.1 የመጀመሪያ ደረጃ መሙላት

Before first use, fully charge the VTOMAN V3 Pro jump starter. Use the provided Type-C USB cable and a compatible USB wall adapter (not included).

Image: The VTOMAN V3 Pro jump starter connected to a wall adapter via its Type-C USB cable for charging, illustrating the fast charging capability.

• Connect the Type-C cable to the input port on the jump starter.
• የኬብሉን ሌላኛውን ጫፍ ከዩኤስቢ የኃይል ምንጭ ጋር ያገናኙ.
• The electricity indicator lights will illuminate to show the charging progress.
• ሙሉ ክፍያ በግምት 2.6 ሰዓታት ይወስዳል።

4. የአሠራር መመሪያዎች

4.1 Jump Starting a Vehicle (Standard Mode)

The VTOMAN V3 Pro can jump start 12V vehicles with up to 6L gasoline or 4L diesel engines. It can operate in temperatures from -4°F to 140°F.

Image: A three-step visual guide demonstrating how to jump start a car: 1. Insert jumper cables into the jump starter. 2. Connect clamps to the car battery (green light indicates correct connection). 3. Start the vehicle.

1. የመዝለያ ጀማሪው በቂ ኃይል መሙላቱን ያረጋግጡ።
2. Insert the smart jumper cable connector into the 12V jumper cable interface on the jump starter.
3. ያገናኙት። ቀይ (+) clamp to the vehicle's አዎንታዊ (+) የባትሪ ተርሚናል.
4. ያገናኙት። ጥቁር (-) clamp to the vehicle's negative (-) battery terminal.
5. Once connected, the smart cable indicator light should be ጠንካራ አረንጓዴ, indicating a correct connection and readiness to jump start. If it's red, check connections.
6. ተሽከርካሪዎን ይጀምሩ.
7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.

4.2 Jump Starting a Completely Dead Battery (Boost Mode)

If the vehicle battery is completely dead, the smart cable indicator light may be off or flashing green. In this scenario, use the Boost mode.

Image: A four-step visual guide for using Boost Mode: 1. Insert jumper cables. 2. Connect clamps (flashing green light). 3. Press the 'BOOST' button on the smart cable. 4. Start the vehicle.

1. Follow steps 1-4 from Section 4.1.
2. If the smart cable indicator light is off or flashing green, press the "BOOST" button on the smart cable.
3. The indicator light should turn solid green.
4. Start your vehicle within 30 seconds.
5. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.

4.3 እንደ ፓወር ባንክ መጠቀም

The V3 Pro features a 5V/2.1A USB output port to charge various mobile devices.

Image: The VTOMAN V3 Pro jump starter connected via USB to charge a smartphone, demonstrating its power bank functionality.

• Connect your device's USB charging cable to the USB output port on the jump starter.
• የዝላይ አስጀማሪው መሳሪያዎን በራስ-ሰር መሙላት ይጀምራል።

4.4 Using the LED Emergency Light

The integrated LED flashlight has three modes for various situations.

Image: The VTOMAN V3 Pro jump starter's LED flashlight illuminating a dark area, with icons indicating its three modes: normal, strobe, and SOS.

• Press and hold the power button for 3 seconds to turn on the LED light (Normal mode).
• Press the power button once to switch to Strobe mode.
• Press the power button again to switch to SOS mode.
• Press the power button once more to turn off the light.

4.5 ኮምፓስ ተግባር

The V3 Pro includes an integrated compass for basic directional guidance during outdoor activities or emergencies.

5. ጥገና እና ማከማቻ

Proper maintenance ensures the longevity and performance of your VTOMAN V3 Pro jump starter.

Image: An illustration depicting the 24-month standby time of the VTOMAN V3 Pro jump starter, highlighting its long-term charge retention.

• በመሙላት ላይ፡ Recharge the unit every 3-6 months, even if not used, to maintain optimal battery health.
• ማጽዳት፡ Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasives.
• ማከማቻ፡ Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures. The unit has a 24-month ultra-long standby time and will automatically shut down after 30 seconds of inactivity to conserve power.
• የሙቀት መጠን፡ Avoid storing or operating in temperatures outside the recommended range (-4°F to 140°F).

6. መላ መፈለግ

If you encounter issues with your VTOMAN V3 Pro, refer to the following common problems and solutions.

7. ዝርዝሮች

Image: The VTOMAN V3 Pro jump starter held in a hand, illustrating its compact size and light weight (0.61 lbs), with dimensions of 5.95 x 3.15 x 1.15 inches.

8. ዋስትና እና ድጋፍ

VTOMAN provides comprehensive support for its products.

• ዋስትና፡- ከተገዛበት ቀን ጀምሮ የ18 ወር ዋስትና።
• የቴክኒክ ድጋፍ; የዕድሜ ልክ የቴክኒክ ድጋፍ ይገኛል።
• ያነጋግሩ፡ For any after-sales questions or technical assistance, please contact VTOMAN customer service. Refer to the product packaging or official VTOMAN webየእውቂያ ዝርዝሮች ጣቢያ።