LOKLiK Cutting Machine & Auto Heat Press 2 15x15 User Manual

ጠቃሚ የደህንነት መረጃ

WARNING: To reduce the risk of injury, electric shock, fire, or damage to the product, always follow these basic safety precautions.

Always operate the machine on a stable, level, and heat-resistant surface.
Keep hands and fingers clear of the cutting blade and heating plate during operation.
Do not expose the machine to water or excessive moisture.
ጥቅም ላይ በማይውልበት ጊዜ ወይም ከማጽዳትዎ በፊት ማሽኑን ከኃይል መውጫው ያላቅቁት።
Ensure proper ventilation when using the heat press, as some materials may emit fumes.
ልጆች በማይደርሱበት ቦታ ያስቀምጡ.

ምርት አልቋልview

The LOKLiK Cutting Machine and Auto Heat Press 2 15x15 combine precision cutting with automated heat transfer capabilities, designed for various crafting and small business applications.

LOKLiK Cutting Machine Features:

AI-Generated Designs: Integrated AI image generation for unique design creation.
Matless Full-Length Cuts: Supports cutting smart materials up to 13 inches wide and 21 feet long without a mat.
Zero-Cost Software: Access to LOKLiK IdeaStudio with over 18,000 designs and 30+ fonts, no subscription required. Compatible with iOS, Android, Windows, and Mac.
Precise & Quiet Operation: Print-then-cut accuracy down to 0.5 mm and 15% quieter operation due to advanced noise-reduction technology.
ሁለገብ የቁሳቁስ ተኳኋኝነት፡- Cuts over 100 materials from 0.1mm to 2mm thick, including vinyl, cardstock, and more. Supports writing, drawing, scoring, and foil printing.

LOKLiK Auto Heat Press 2 15x15 Features:

Auto Press & Auto Release: Hands-free operation for efficient heat transfer.
Adjustable Pressure (Up to 170 LB): Customizable pressure settings for various materials like HTV, DTF, sublimation, and heat transfer paper.
0-75° Adjustable Screen & Pre-set Parameters: Intuitive display with real-time feedback, ergonomic design, and 4 preset/4 custom parameters for different materials.
1.77-inch Heating Height: Increased height for larger and thicker items like hoodies and multi-layer transfers.
ፈጣን እና እኩል ሙቀት; Dual-tube heating system reaches 410°F in 5 minutes 30 seconds, with adjustable time from 1-999 seconds.
ራስ-ሰር ማጥፋት- Automatic shutdown after 15 minutes of standby time, with a beep reminder.

የማዋቀር መመሪያ

1. ማሸግ እና አቀማመጥ

ሁሉንም ንጥረ ነገሮች ከማሸጊያው ውስጥ በጥንቃቄ ያስወግዱ.
Place both the cutting machine and heat press on a stable, flat, and heat-resistant surface. Ensure adequate space around the heat press for ventilation.
Remove any protective films or packaging materials from the devices.

2. የኃይል ግንኙነት

Connect the power cord to the LOKLiK Cutting Machine and then to a suitable power outlet.
Connect the power cord to the LOKLiK Auto Heat Press 2 and then to a suitable power outlet.

3. Cutting Machine Software Installation

Download the LOKLiK IdeaStudio software from the official LOKLiK website or app store (for iOS/Android).
Install the software on your computer (Windows/Mac) or mobile device.
Connect the cutting machine to your computer via the provided USB cable or pair it via Bluetooth.
Follow the on-screen instructions in the software to complete the initial setup and calibration.

LOKLiK IdeaStudio software interface on a laptop, showing a vast image library and design options. — Figure 1: LOKLiK IdeaStudio software interface, demonstrating its vast image library and design capabilities. The software is zero-cost and supports Bluetooth/USB connection.

የአሠራር መመሪያዎች

A. LOKLiK Cutting Machine Operation

1. Preparing Your Design

Open LOKLiK IdeaStudio software.
Create a new design or select from the extensive library. Utilize the AI image generation feature for unique creations.
Adjust the design size and placement according to your material.

Various craft projects made with the LOKLiK cutting machine, including paper flowers, cards, keychains, and decorated bottles, showcasing its versatility with over 100 materials. — ምስል 2: ዘፀamples of diverse projects created using the LOKLiK cutting machine, demonstrating its ability to work with over 100 different materials from 0.1mm to 2mm.

2. Loading Material

For matless cutting: Load smart materials (up to 13 inches wide and 21 feet long) directly into the machine's feed slot. Ensure the material is aligned properly.
For mat-based cutting: Place your material onto the cutting mat, ensuring it adheres securely. Load the cutting mat into the machine.

A LOKLiK cutting machine performing a matless full-length cut of a 'sunflower' design on a wall, with a person feeding the material. — Figure 3: The LOKLiK cutting machine demonstrating its matless full-length cutting capability, supporting smart materials up to 21 feet long.

3. Performing a Cut

In the IdeaStudio software, select the material type you are using. The software will suggest appropriate cut settings (blade depth, pressure, speed). Adjust if necessary.
Ensure the correct blade is installed for your material.
Initiate the cut from the software. The machine will perform the cut with high precision (down to 0.5 mm accuracy).
Once cutting is complete, unload the material or mat.

Close-up of the LOKLiK cutting machine's blade precisely cutting an intricate 'Good Vibes' design on a material. — ምስል 4፡ ዝርዝር view of the LOKLiK cutting machine's precise cutting action, capable of intricate designs with ultra-precision.

B. LOKLiK Auto Heat Press 2 15x15 Operation

1. Power On and Pre-heating

Plug in the heat press and turn on the power switch.
Use the adjustable screen to set the desired temperature and time for your material. The machine can reach 410°F in approximately 5 minutes 30 seconds.
Utilize the 4 preset or 4 custom parameters for various materials for quick setup.

Three panels showing the LOKLiK Auto Heat Press 2 features: Auto Pressing & Auto Releasing, Fast & Even Heat with dual-zone heating, and Auto Shut-off after 15 minutes. — Figure 5: Key operational features of the LOKLiK Auto Heat Press 2, including automatic pressing and releasing, fast and even dual-zone heating, and a 15-minute auto shut-off for safety and convenience.

2. Preparing Your Item for Pressing

Place your garment or item on the lower platen of the heat press.
Position your heat transfer material (HTV, DTF, sublimation paper, etc.) onto the item.
Ensure the item and transfer are centered and flat. The 1.77-inch heating height accommodates thicker items like hoodies.

Diagram illustrating the 1.77-inch increased heating height of the LOKLiK Auto Heat Press 2, showing how it accommodates both t-shirts and thicker hoodies. — Figure 6: The increased 1.77-inch heating height of the heat press allows for wider substrate application and greater material compatibility, suitable for items like t-shirts and hoodies.

3. ግፊትን ማስተካከል

The heat press allows for pressure adjustment up to 170 LB. Adjust the pressure based on your material and transfer type.
Refer to the material manufacturer's recommendations for optimal pressure settings.

Image showing the LOKLiK Auto Heat Press 2 with an adjustable pressure range up to 170 LB, and a bar chart indicating pressure levels for different materials like HTV, DTF, Sublimation Paper, and Heat Transfer Paper. — Figure 7: The heat press offers adjustable pressure up to 170 LB, allowing customization for various materials and professional results. Consult the user manual for specific material parameter recommendations.

Comparison image showing two pressed garments, one with 'HTVRONT Auto 2' (Maximum 170 LB Pressure) and another with 'OTHERS' (Maximum 110 LB Pressure), highlighting improved transferred adherence, higher transfer rate, and stronger washable ability with higher pressure. — Figure 8: Demonstrates the benefits of higher pressure (up to 170 LB) for heat transfers, resulting in improved adherence, higher transfer rates, and enhanced washability compared to lower pressure presses.

4. Initiating the Press Cycle

Once temperature, time, and pressure are set, activate the press. The machine will automatically lower the heating plate, apply pressure, and begin the transfer cycle.
The auto-release function will lift the heating plate once the cycle is complete.
Carefully remove the item after the press cycle.

ጥገና

1. Cleaning the Cutting Machine

ከማጽዳትዎ በፊት ማሽኑ መሰካቱን ያረጋግጡ።
ውጫዊውን ክፍል ለማጥፋት ለስላሳ እና ደረቅ ጨርቅ ይጠቀሙ.
Periodically clean the blade housing and cutting area to remove any material debris. Use a small brush or compressed air if necessary.
Replace the blade when it becomes dull to maintain cutting precision.

2. Cleaning the Heat Press

Always unplug the heat press and allow it to cool completely before cleaning.
Wipe the heating plate with a soft, damp cloth. For stubborn residue, use a specialized heat press cleaning solution, following its instructions.
Clean the lower platen and silicone pad regularly.
Avoid using abrasive cleaners or harsh chemicals that could damage the surfaces.

መላ መፈለግ

ችግር	ሊሆን የሚችል ምክንያት	መፍትሄ
Cutting Machine not powering on.	የኃይል ገመድ ደህንነቱ በተጠበቀ ሁኔታ አልተገናኘም፤ የኃይል መውጫ ችግር።	የኃይል ግንኙነቶችን ይፈትሹ. የተለየ መውጫ ይሞክሩ።
Cutting is inaccurate or incomplete.	Dull blade; incorrect cut settings; material not loaded correctly.	Replace blade. Adjust cut settings in IdeaStudio. Ensure material is flat and aligned.
Heat Press not heating up.	Power cord not connected; power switch off; internal fault.	Verify power connections and switch. If problem persists, contact support.
Transfer material not adhering properly.	Incorrect temperature, time, or pressure settings; material incompatibility.	Adjust settings according to material manufacturer's recommendations. Ensure even pressure.
Heat Press auto-shuts off unexpectedly.	15-minute standby auto shut-off activated.	This is a safety feature. Simply power on again to resume operation.

ዝርዝሮች

ባህሪ	ዝርዝር
የምርት ስም	LOKLiK
ሞዴል	Cutting Machine & Auto Heat Press 2 15x15
Cutting Machine Material Compatibility	0.1mm to 2mm thick, over 100 materials
Cutting Machine Max Cut Width	13 inches (matless)
Cutting Machine Max Cut Length	21 feet (matless)
Cutting Machine Accuracy	0.5 mm (print-then-cut)
Heat Press Plate Size	15x15 ኢንች
Heat Press Max Pressure	170 LB
Heat Press Max Temperature	410°F (210°ሴ)
Heat Press Heating Time	Reaches 410°F in 5 min 30 sec
Heat Press Adjustable Time Range	1-999 ሰከንድ
Heat Press Heating Height	1.77 ኢንች (4.5 ሴሜ)
Heat Press Auto Shut-off	15 minutes standby
የክወና ሁነታ	አውቶማቲክ
ቀለም	ቱርኩይስ
Material (Construction)	ፕላስቲክ (ዋናው አካል)

	LOKLİK ImPress Mini 3 Heat press for DIY Crafts ለ DIY ዕደ-ጥበብ አድናቂዎች የተነደፈ የታመቀ እና ሁለገብ የሙቀት ማተሚያ የሆነውን LOKLİK ImPress Mini 3ን ያግኙ። ባለሁለት ሙቀት ሳህኖች (ጥምዝ/ጠፍጣፋ)፣ ትክክለኝነት ጫፍ፣ እና ተለዋዋጭ የሙቀት ቅንብሮችን (100-200°C) በማሳየት ለሙቀት ማስተላለፊያ እና ለተለያዩ ነገሮች እንደ ኩባያ፣ ጫማ፣ ኮፍያ እና የታሸጉ እንሰሳት ላይ ለማፍሰስ ተስማሚ ነው። ፈጣን ጅምር መመሪያ እና የደህንነት ባህሪያትን ያካትታል።
	LOKLIK ቀላል የሙቀት ማተሚያ ማሽን የተጠቃሚ መመሪያ እና መግለጫዎች ዝርዝር መመሪያዎችን፣ የቁሳቁስ መቼቶችን፣ የደህንነት ጥንቃቄዎችን እና የዋስትና መረጃዎችን ጨምሮ LOKLIK Easy Heat Press ማሽንን ለመስራት እና ለማቆየት አጠቃላይ መመሪያ።
	LOKLIK ImPress Mini 3 የተጠቃሚ መመሪያ፡ ሙቀት ፕሬስ እና የሳብሊሜሽን መመሪያ ለLOKLIK ImPress Mini 3 የሙቀት ማተሚያ አጠቃላይ የተጠቃሚ መመሪያ። መሳሪያዎን ለሙቀት ማስተላለፊያ ቪኒል እንዴት እንደሚጠቀሙ፣ እንደሚያዋቅሩ እና መላ መፈለግ እንደሚችሉ ይወቁ፣ sublimation እና ሌሎችም። ዝርዝሮችን፣ ተደጋጋሚ ጥያቄዎችን እና የደህንነት ጥንቃቄዎችን ያካትታል።
	LOKLIK iEngrave LEF02 ሌዘር መቅረጫ የተጠቃሚ መመሪያ እና የደህንነት መመሪያ ይህ LOKLIK iEngrave LEF02 የተጠቃሚ መመሪያ አጠቃላይ የደህንነት ጥንቃቄዎችን፣ የምርት ዝርዝር መግለጫዎችን፣ ለ LightBurn እና LaserGRBL ሶፍትዌር የመጫኛ መመሪያዎችን እና ለLOKLIK iEngrave laser መቅረጫ ተደጋጋሚ ጥያቄዎችን ይሰጣል።
	LOKLIK iEngrave™ የሽፋን ተጠቃሚ መመሪያ ለLOKLIK iEngrave™ ሽፋን ሌዘር መቅረጫ (ሞዴል LEF02/LEF01) አጠቃላይ የተጠቃሚ መመሪያ። የደህንነት ጥንቃቄዎችን፣ የምርት ዝርዝሮችን፣ ዝርዝር የመጫኛ መመሪያዎችን፣ የሶፍትዌር ማዋቀር ለ LightBurn እና Laser GRBL፣ በተደጋጋሚ የሚጠየቁ ጥያቄዎችን፣ ጥገናን፣ ዋስትናን እና የFCC ተገዢነትን ይሸፍናል።
	VEVOR ባለብዙ ተግባር ዲጂታል የሙቀት ማተሚያ ማሽን የተጠቃሚ መመሪያ ዝርዝር የተጠቃሚ መመሪያ ለVEVOR Multifunctional Digital Heat Press ማሽን፣ የሽፋን ማዋቀር፣ አሠራር፣ የሙቀት መቆጣጠሪያ፣ የህትመት ቴክኒኮች እና የስብሰባ እና የሙቀት ማስተላለፊያ መተግበሪያዎች መላ መፈለግ።

LOKLiK Cutting Machine & Auto Heat Press 2 15x15