ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

1. መግቢያ

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

ምስል፡ አልቋልview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. የምርት ባህሪዎች

• ከእጅ-ነጻ ቁጥጥር; Automatically detects presence and ambient light to activate or deactivate lights.
• የማበጀት ቅንብሮች፡ Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
• Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
• ሁለንተናዊ ተኳኋኝነት Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
• Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
• ቀላል መጫኛ; Fits standard junction boxes and requires a neutral wire.
• ዘላቂ ንድፍ; Constructed with tough thermoplastic housing for impact and scratch resistance.

ምስል፡ ዝርዝር view of the product features and adjustable settings on the dimmer switch.

3. የደህንነት መረጃ

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

• ይህ መሳሪያ በብሔራዊ ኤሌክትሪክ ኮድ እና በአካባቢው ደንቦች መሰረት ለመጫን የታሰበ ነው.
• ብቃት ያለው የኤሌትሪክ ባለሙያ ይህንን ተከላ እንዲያከናውን ይመከራል.
• የመዳብ ሽቦዎችን ብቻ ይጠቀሙ።
• ለትክክለኛ አሠራር ገለልተኛ ሽቦ ያስፈልጋል።
• This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. የጥቅል ይዘቶች

• ECOELER Motion Sensor Dimmer Switch
• የግድግዳ ሰሌዳ
• የመጫኛ መመሪያዎች (ይህ መመሪያ)
• ማፈናጠጥ ብሎኖች
• የወልና ካፕ

Image: Product dimensions and included accessories.

5. ዝርዝሮች

Image: Universal compatibility with various bulb types and their wattagሠ ደረጃ አሰጣጦች

6. መጫን

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 ቅድመ-መጫኛ

1. ኃይል አጥፋ፡ Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltagሠ ሞካሪ።
2. የድሮ መቀየሪያን አስወግድ፡ Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
3. ሽቦዎችን መለየት; Identify the following wires in your electrical box:
   • Hot (Line) Wire: ከሰርኪው ሰባሪው ኃይል ያመነጫል።
   • ሽቦ ጫን ከብርሃን መሳሪያው ጋር ይገናኛል።
   • ገለልተኛ ሽቦ; (Required) Typically white, often capped together with other neutral wires.
   • የመሬት ሽቦ; (Recommended) Typically bare copper or green.

6.2 የሽቦ መመሪያዎች

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

• ያገናኙት። ጥቁር wire from the switch to the ትኩስ (መስመር) wire from the wall.
• ያገናኙት። ቀይ wire from the switch to the ጫን wire from the wall.
• ያገናኙት። ነጭ wire from the switch to the ገለልተኛ wire from the wall.
• ያገናኙት። አረንጓዴ wire from the switch to the መሬት wire from the wall.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Mounting and Finishing

1. Carefully push all wired connections into the electrical box.
2. Mount the switch into the electrical box using the provided screws.
3. የግድግዳውን ግድግዳ ያያይዙ.
4. በወረዳው ሰባሪው ላይ ኃይሉን መልሰው ያብሩት።