GODIYMODULES High Voltage DC Converter Module Board User Manual

1. መግቢያ

This manual provides detailed instructions for the proper installation, operation, and maintenance of the GODIYMODULES High Voltage DC Converter Module Board. This module is designed to provide stable high voltage DC and filament voltage, suitable for applications such as powering Nixie tubes and Magic Eye tubes.

ምስል 1.1፡ ከላይ ወደ ታች view of the GODIYMODULES High Voltage DC Converter Module Board. This image shows the overall layout of the components, including capacitors, inductors, the DC input jack, and the terminal blocks for input and output connections.

2. የደህንነት መረጃ

WARNING: This module generates high voltage. Improper handling can result in electric shock, injury, or damage to equipment. Always exercise extreme caution when working with high voltagሠ ወረዳዎች.

• ማንኛውንም ግንኙነት ወይም ማስተካከያ ከማድረግዎ በፊት የኃይል አቅርቦቱ መቋረጡን ያረጋግጡ።
• Do not touch any components on the board when power is applied.
• Use appropriate insulation and safety equipment.
• Verify all connections are correct before applying power.
• This module is intended for experienced electronics hobbyists and professionals.

3. ባህሪያት

• Designed for Nixie and Magic Eye Tube anode and filament power supply.
• የሚስተካከለው ከፍተኛ መጠንtage DC output.
• Dedicated 6.3V filament voltagሠ ውፅዓት።
• Compact board design.

4. ዝርዝሮች

5. ማዋቀር እና ግንኙነቶች

Follow these steps to correctly connect the High Voltage DC Converter Module Board to your system. Ensure all power is disconnected before proceeding.

5.1 የግቤት ኃይል ግንኙነት

The module accepts a DC input voltage between 9V and 12V. There are two methods for providing input power:

1. የዲሲ ፓወር ጃክ፡ Use a DC power adapter with a 5.5*2.1 mm plug. The plug must be inner positive and outer negative.
2. ተርሚናል ብሎክ፡ Connect your DC 9V-12V power supply to the designated input terminals on the green screw terminal block. Observe correct polarity.

Image 5.1: Connection diagram showing input and output terminals. The DC 9-12V input can be connected via the barrel jack (5.5*2.1mm, inner positive, outer negative) or the screw terminal block. The image also indicates the output voltage regulation potentiometer.

Image 5.2: Detailed connection diagram illustrating the input power options (DC 9-12V via barrel jack or screw terminals) and the output connections for 6.3V filament voltage, GND, and adjustable DC 150-280V. The output voltage adjustment potentiometer is also clearly marked.

5.2 የውጤት ግንኙነቶች

The module provides two main outputs via the green screw terminal block:

• DC 150V-280V Output: ይህ ከፍተኛ መጠን ነውtage output, adjustable via the onboard potentiometer. Connect the anode of your Nixie or Magic Eye tube to this output.
• የዲሲ 6.3 ቮልት ውፅዓት፡ This output provides 6.3V for tube filaments. Connect the filament of your tube to this output.
• GND Common ground connection for both outputs.

Ensure all connections are secure and correctly polarized before applying power.

6. የአሠራር መመሪያዎች

6.1 በማብራት ላይ

Once all connections are verified and secure, connect the DC 9V-12V power supply to the module. The module will immediately begin generating the output voltagኢ.

6.2 Adjusting High Voltagሠ ውፅዓት

ከፍተኛ መጠንtage output (DC 150V-280V) is adjustable using the blue potentiometer located on the board. Use a small screwdriver to carefully turn the potentiometer:

• መዞር በሰዓት አቅጣጫ ያደርጋል መጨመር የውጤቱ መጠንtage.
• መዞር በተቃራኒ ሰዓት አቅጣጫ ያደርጋል መቀነስ የውጤቱ መጠንtage.

Always use a multimeter to measure the output voltage while adjusting to prevent over-voltage damage to your connected components.

ምስል 6.1: ከፍተኛ view of the module, clearly showing the blue potentiometer used for adjusting the high voltagሠ ውፅዓት።

7. ጥገና

The GODIYMODULES High Voltage DC Converter Module Board is designed for reliable operation and requires minimal maintenance.

• ሞጁሉን ንጹህ እና ከአቧራ እና ፍርስራሾች ነጻ ያድርጉት.
• ከመጠን በላይ ሙቀትን ለመከላከል በሞጁሉ ዙሪያ በቂ የአየር ዝውውርን ያረጋግጡ.
• ሞጁሉን ለእርጥበት ወይም ለከፍተኛ ሙቀት ከማጋለጥ ይቆጠቡ።
• Regularly inspect connections for looseness or corrosion.

8. መላ መፈለግ

• ምንም ውጤት የለም Voltage:
  • Verify the input power supply is connected and providing 9V-12V DC.
  • Check the polarity of the input DC power plug (inner positive, outer negative).
  • Ensure all output connections are secure.
• የተሳሳተ የውጤት መጠንtage:
  • ለከፍተኛ መጠንtage output, adjust the potentiometer as described in Section 6.2.
  • Use a multimeter to accurately measure the output voltagኢ.
  • የግቤት ጥራዝ ያረጋግጡtage የተረጋጋ እና በተጠቀሰው ክልል ውስጥ ነው።
• የሞዱል ከመጠን በላይ ማሞቅ፡
  • በሞጁሉ ዙሪያ በቂ የአየር ዝውውርን ያረጋግጡ።
  • Verify that the load connected to the outputs does not exceed the specified current limits (15mA for HV, 1500mA for 6.3V).

9. ድጋፍ

For further assistance or technical inquiries, please refer to the seller's contact information on the product purchase page or visit the GODIYMODULES official support channels.