ማኑዋሎች+

ZIEGER 10011715

ZIEGER Crash Bar Kit Instruction Manual

Model: 10011715 for Triumph Tiger 900 GT Rally Pro (C701 | C702)

መግቢያ

This manual provides detailed instructions for the proper installation, maintenance, and safe use of your ZIEGER Crash Bar Kit. Designed specifically for the Triumph Tiger 900, GT, Rally, and Pro models (C701 | C702) from 2019 to 2024, these crash bars offer optimal protection for critical motorcycle components. Please read this manual thoroughly before beginning installation to ensure correct assembly and to prevent damage or injury.

የደህንነት መረጃ

የጥቅል ይዘቶች

መጫኑን ከመጀመርዎ በፊት ሁሉም ክፍሎች መኖራቸውን እና ምንም ጉዳት እንደሌላቸው ያረጋግጡ።

If any parts are missing or damaged, please contact ZIEGER customer support.

ተኳኋኝነት

This ZIEGER Crash Bar Kit is compatible with the following motorcycle models:

ጠቃሚ ማስታወሻ፡- This crash bar kit is አይደለም compatible with the Triumph Tiger 900 GT Low model.

ማዋቀር እና መጫን

Follow these steps carefully for proper installation. It is recommended to have a second person assist during certain stagኢ.

አስፈላጊ መሣሪያዎች (አልተካተተም):

የመጫኛ ደረጃዎች

  1. ሞተር ሳይክልን ያዘጋጁ; Park the motorcycle on a level, stable surface. Secure it using a center stand or appropriate paddock stands to prevent it from tipping over. Ensure the engine and exhaust are cool.
  2. የመጫኛ ነጥቦችን መለየት; Locate the designated mounting points on the motorcycle frame. These typically involve existing engine mount bolts or frame attachment points. Refer to the diagrams below for visual guidance.
  3. Remove Existing Bolts (if necessary): Carefully remove any existing bolts from the identified mounting points. Work on one side of the motorcycle at a time to maintain structural integrity.
  4. Position the Crash Bar: Hold the crash bar (e.g., left side) in position, aligning its mounting holes with the frame's attachment points.
  5. የመጫኛ ሃርድዌርን ጫን፡- Insert the provided bolts, washers, and spacers as indicated in the assembly diagram. Apply a small amount of thread-locking compound to the bolt threads before insertion. Hand-tighten all bolts initially.
  6. ለተቃራኒው ጎን ይድገሙት; Follow steps 3-5 for the other side of the motorcycle, installing the second crash bar.
  7. አሰላለፍ እና ማስተካከል፦ Once both crash bars are loosely installed, ensure they are properly aligned and do not interfere with any other motorcycle components (e.g., handlebars, fairings, cables).
  8. Torque All Fasteners: Using a torque wrench, tighten all mounting bolts to the manufacturer's specified torque values. Refer to your motorcycle's service manual for specific frame bolt torque specifications, or use general torque values for the bolt size if not specified by ZIEGER. ከመጠን በላይ አታድርጉ.
  9. የመጨረሻ ምርመራ፡- Double-check all fasteners to ensure they are securely tightened. Verify that the crash bars are firmly attached and do not wobble. Start the motorcycle and check for any unusual vibrations or noises.

የመጫኛ ንድፎች;

ፊት ለፊት view of ZIEGER crash bar installed on a Triumph Tiger 900, showing attachment points near the engine and radiator.

ምስል 1፡ የፊት ለፊት view of the ZIEGER crash bar installed on a Triumph Tiger 900. This image highlights the robust construction and how the bar integrates with the motorcycle's frame, providing protection to the engine and radiator area. Note the secure mounting points visible around the engine casing and lower frame.

ጎን view of ZIEGER crash bar installed on a Triumph Tiger 900, showing coverage for the engine and lower fairing.

ምስል 2፡ ጎን view of the ZIEGER crash bar mounted on a Triumph Tiger 900. This perspective illustrates the extent of protection offered to the engine, exhaust headers, and lower fairing. The design follows the contours of the motorcycle, ensuring a secure fit and minimal aesthetic impact while maximizing protective coverage.

አጠቃቀም እና እንክብካቤ

Once installed, the ZIEGER Crash Bars require no special operation. They are designed to provide passive protection to your motorcycle's engine and frame in the event of a tip-over or low-speed slide. While robust, they are not indestructible and are intended to absorb impact energy to minimize damage to the motorcycle itself.

ጥገና

To ensure the continued effectiveness and safety of your ZIEGER Crash Bars, perform the following maintenance checks:

መላ መፈለግ

ችግርሊሆን የሚችል ምክንያትመፍትሄ
Crash bars feel loose or rattle.ልቅ የሚሰቀሉ ብሎኖች።Check and re-torque all mounting bolts to specifications. Apply thread-locking compound if not previously used.
Interference with other motorcycle components.በመጫን ጊዜ ትክክል ያልሆነ አሰላለፍ.Loosen all mounting bolts, re-align the crash bars, and then re-tighten. Ensure no cables or hoses are pinched.
Crash bar is bent or damaged after an incident.Impact sustained.For safety and optimal protection, replace the damaged crash bar. Do not attempt to straighten or repair.

ዝርዝሮች

ዋስትና እና ድጋፍ

ZIEGER products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your retailer. For technical support, missing parts, or any questions regarding your ZIEGER Crash Bar Kit, please contact the manufacturer:

አምራች፡ IBEX GmbH

ስልክ፡ +49 3501 5719730

ኢሜይል፡- info@ibex-parts.de

እባክዎን ድጋፍ ሰጪን ሲያነጋግሩ የምርትዎን ሞዴል ቁጥር (10011715) እና የግዢ ዝርዝሮችን ያዘጋጁ።

Documents - ZIEGER – 10011715

ምንም ተዛማጅ ሰነዶች የሉም