iMaihom 50W Motion Sensor Outdoor Light

መግቢያ

Thank you for choosing the iMaihom 50W Motion Sensor Outdoor Light. This hardwired LED floodlight provides 5000 lumens of 6500K daylight white light, enhancing security and visibility for your outdoor spaces. Featuring advanced motion detection and a dusk-to-dawn function, this IP65 waterproof light is designed for reliable performance in various weather conditions. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

የደህንነት መረጃ

• Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture.
• ስለ መጫኑ ሂደት እርግጠኛ ካልሆኑ ብቃት ያለው ኤሌትሪክ ያማክሩ።
• Ensure all electrical connections are made according to local codes and ordinances.
• የ LED መብራት ሲበራ በቀጥታ ወደ ዓይንዎ አይመልከቱ፤ ምክንያቱም ይህ የዓይን ጉዳት ሊያስከትል ይችላል።
• This product is designed for outdoor use and is IP65 waterproof. However, ensure proper sealing during installation to maintain water resistance.
• Do not attempt to disassemble or modify the fixture, as this will void the warranty and may pose a safety risk.

የጥቅል ይዘቶች

መጫኑን ከመጀመርዎ በፊት ሁሉም አካላት መኖራቸውን ያረጋግጡ-

• iMaihom 50W Motion Sensor Outdoor Light (1 unit)
• የመጫኛ ቅንፍ (1 አሃድ)
• የሽቦ ፍሬዎች (2 አሃዶች)
• Screws and Expansion Rubber Plugs (various quantities for mounting)
• ጋኬት (1 አሃድ)
• የትምህርት መመሪያ (ይህ ሰነድ)

Figure 1: Included Parts List

የምርት ባህሪያት

• ብሩህ ብርሃን; Emits 5000 lumens of 6500K daylight white light for extensive coverage.
• የላቀ እንቅስቃሴ ማወቂያ፡- Features a 180-degree detection angle and a 19–72 ft range, with adjustable lighting duration from 1–10 minutes.
• Dusk to Dawn Function: Built-in light sensor automatically turns the floodlight ON at dusk and OFF at dawn.
• IP65 የውሃ መከላከያ; Designed to withstand harsh weather conditions, ensuring year-round reliability.
• ቀላል መጫኛ; Simple 3-step hardwired installation process.
• የሚስተካከሉ ጭንቅላቶች; Three light heads are 360° adjustable to direct light where needed.

ማዋቀር እና መጫን

Before installation, ensure the power supply is turned off at the circuit breaker to prevent electrical shock.

1. የድሮውን ማጣበቂያ ያስወግዱ (ካለ): Carefully disconnect and remove any existing light fixture from the junction box.
2. የመጫኛ ቅንፍ ጫን Secure the provided mounting bracket to the junction box using the appropriate screws. Ensure it is firmly attached.
3. ሽቦ ማገናኘት; Connect the wires from the new iMaihom light to the household wiring using the included wire nuts. Match colors: black to black (hot), white to white (neutral), and green to ground (bare copper). Wrap electrical tape around wire nuts for added security.
4. ብርሃኑን ይጫኑ; Align the light fixture with the mounting bracket and secure it with the long machine screw provided. Ensure the gasket is properly seated between the fixture and the mounting surface to prevent water intrusion.
5. የብርሃን ጭንቅላትን ማስተካከል; Loosen the Phillips screw on the main head to adjust its angle. The side LED heads can also be articulated to direct light as desired.

Figure 2: Hardwired Installation Steps

Figure 3: Wall Mounted and Soffit Mounted Options

የአሠራር መመሪያዎች

The iMaihom motion sensor light offers multiple operating modes and adjustable settings located on the bottom of the motion sensor unit.

የቁጥጥር መደወያዎች፡-

• TEST Mode (Left Dial): Used for initial setup and testing. In this mode, the light will turn on for 5 seconds when motion is detected, regardless of ambient light.
• TIME (Middle Dial): Adjusts the duration the light stays on after motion is detected, ranging from 10 seconds to 10 minutes.
• SENSITIVITY (Right Dial): Controls the detection range of the motion sensor (L: 19-26.2ft, M: 26.2-39.3ft, H: 39.3-72ft). Adjust this to prevent false triggers from small animals or distant objects.

የአሠራር ሁነታዎች፡-

• የእንቅስቃሴ ዳሳሽ ሁነታ፡- The light activates only when motion is detected in dark conditions. The duration and sensitivity are set by the TIME and SENSITIVITY dials.
• Dusk to Dawn Mode (D2D): The built-in photocell sensor automatically turns the light ON when ambient light levels fall below a certain threshold (dusk) and OFF when light levels rise (dawn). Motion detection is typically overridden or integrated based on specific settings.

Figure 4: Control Dials for Settings

ምስል 5፡ ከማለዳ እስከ ንጋት ሁነታ ያለው አሠራር

ጥገና

• ማጽዳት፡ እቃውን ለስላሳ, መamp ጨርቅ. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን አይጠቀሙ.
• ምርመራ፡- Periodically inspect the fixture for any signs of damage, loose connections, or wear.
• የሌንስ እንክብካቤ; Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure optimal performance.

መላ መፈለግ

ዝርዝሮች

ዋስትና እና ድጋፍ

iMaihom products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official iMaihom webጣቢያ. ለዋስትና ጥያቄዎች የግዢ ደረሰኝዎን እንደ ግዢ ማረጋገጫ ያቆዩት።