1. መግቢያ
This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash DM12PRO 3-Pack 120mm PC Case Fans. These fans feature PWM control for efficient cooling and Addressable RGB (ARGB) lighting for customizable aesthetics, managed via an included controller hub and remote, or motherboard synchronization.
2. የጥቅል ይዘቶች
- 3 x 120ሚሜ የ RGB አድናቂዎች
- 1 x PC Fan Hub / ARGB Controller
- 1 x ARGB Controller Remote
- 1 x 5V 3-Pin ARGB Cable
- 1 x PWM Cable
- 1 x Power Cable (SATA)
- 12 x ማፈናጠጥ ብሎኖች
3. ባህሪያት
- 3-Pin ARGB & 4-Pin PWM 120mm Fan: Compatible with most motherboards or the included ARGB controller, operating at 1600 ±10% RPM with 48.32 CFM airflow and 1.75 mmH₂O pressure for quiet 27.36dBA, efficient cooling.
- Unified ARGB Controller Hub: Manages lighting effects and fan speeds for multiple RGB fans from a single unit, reducing cable clutter.
- ምቹ የርቀት መቆጣጠሪያ; Adjust RGB fan lighting modes, brightness, and fan speeds without opening your PC or using software.
- RGB Motherboard Sync: Hold the MODE button for 3 seconds to sync the RGB fans with your motherboard software at startup. Sync automatically resumes upon system restart.
- Daisy-Chainable Design: Fans feature male and female ARGB and PWM connectors for easy daisy-chaining, minimizing cable usage when connecting directly to the motherboard.
4. ማዋቀር እና መጫን
Follow these steps to install your darkFlash DM12PRO fans and controller hub.
- የደጋፊ ቦታ፡ Determine the optimal placement for your fans within your PC case for desired airflow (intake or exhaust). Use the included mounting screws to secure each fan.
- Connecting Fans to Controller Hub: Connect the 4-pin PWM cable from each fan to the 'FAN' ports on the controller hub. Connect the 3-pin ARGB cable from each fan to the 'ARGB' ports on the controller hub. The fans are designed to be daisy-chained, allowing multiple fans to connect to a single port on the hub if needed.
- Controller Hub Power: Connect the included SATA power cable to the controller hub and to an available SATA power connector from your power supply unit (PSU).
- Motherboard Connections (Optional):
- PWM Sync: Connect the PWM cable from the controller hub to an available 4-pin PWM fan header on your motherboard (e.g., CPU_FAN or SYS_FAN). This allows your motherboard to control fan speeds based on system temperature.
- ARGB Sync: Connect the 5V 3-Pin ARGB cable from the controller hub to a compatible 5V 3-Pin Addressable RGB header on your motherboard (e.g., AURA Sync, Mystic Light Sync, RGB Fusion, Polychrome RGB). This enables software control of lighting effects.
- የርቀት መቆጣጠሪያ፡- The remote control is pre-paired with the controller hub. Ensure the plastic tab is removed from the battery compartment before first use.
Image: The darkFlash DM12PRO 3-Pack, including the fans, controller hub, and remote control.
ምስል: ዝርዝር view of the accessories included with the darkFlash DM12PRO fans, showing the SATA power cable, temperature sensor cable, motherboard sync cable, remote control, and the controller hub with its dimensions.
Video: This video demonstrates the darkFlash DM12PRO fans installed in a PC case, showcasing their ARGB lighting effects and the functionality of the remote control for adjusting colors and modes. It also highlights the various connectors on the controller hub for PWM and ARGB synchronization.
5. የአሠራር መመሪያዎች
Once installed, operate your darkFlash DM12PRO fans using the remote control or motherboard software.
5.1. የርቀት መቆጣጠሪያ ክወና
The included remote control allows for direct management of fan lighting and speed.
- አብራ/አጥፋ፡ Power the fans and lighting on or off.
- ራስ-ሰር Cycles through various pre-programmed ARGB lighting effects.
- S+/S- Adjust the speed of the lighting effects.
- M+/M-: Change between different lighting modes.
- የቀለም አዝራሮች; Select a static color for the fan lighting.
- የብሩህነት አዝራሮች; Adjust the brightness of the ARGB lighting.
- M/B Button: Hold for 3 seconds to switch between remote control mode and motherboard synchronization mode.
5.2. Motherboard Synchronization
If connected to a compatible 5V 3-Pin ARGB header on your motherboard, you can control the fan lighting via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome RGB).
- Ensure the M/B button on the remote is held for 3 seconds to activate motherboard sync mode.
- Once enabled, the lighting will be controlled by your motherboard software and will automatically resume sync upon system restart.
Image: A hand holding the remote control, demonstrating its use to change the lighting effects of the darkFlash DM12PRO fans installed in a PC case.
Image: A PC build showcasing darkFlash DM12PRO fans with synchronized ARGB lighting, indicating compatibility with various motherboard RGB software platforms.
6. ጥገና
Regular maintenance ensures optimal performance and longevity of your fans.
- ማጽዳት፡ Periodically clean the fan blades and frames to remove dust buildup. Use compressed air or a soft, dry cloth. Ensure the PC is powered off and unplugged before cleaning.
- የኬብል አስተዳደር ሁሉም ኬብሎች በማራገቢያ ምላጭ ወይም በሌሎች ክፍሎች ላይ ጣልቃ ገብነትን ለመከላከል በጥንቃቄ የተስተካከሉ መሆናቸውን ያረጋግጡ።
7. መላ መፈለግ
ችግሮች ካጋጠሙዎት, የሚከተሉትን የተለመዱ መፍትሄዎች ይመልከቱ:
- አድናቂዎች የማይሽከረከሩ;
- Check if the SATA power cable is securely connected to the controller hub and the PSU.
- Verify that the 4-pin PWM cables from the fans are correctly plugged into the controller hub.
- If using motherboard PWM control, ensure the PWM cable from the hub is connected to a functional motherboard fan header.
- RGB መብራት አይሰራም፡
- Ensure the 3-pin ARGB cables from the fans are properly connected to the controller hub.
- If using the remote, check the battery and ensure the remote is pointed towards the hub's receiver.
- If using motherboard sync, ensure the 5V 3-Pin ARGB cable from the hub is connected to a compatible motherboard header and that the M/B button on the remote has been pressed for 3 seconds to switch to motherboard control. Check your motherboard's RGB software settings.
- Inconsistent Fan Speed:
- If using motherboard PWM control, check your BIOS/UEFI settings or motherboard software for fan curve adjustments.
- Ensure the PWM cable from the hub is connected to a PWM-enabled header, not a DC-only header.
8. ዝርዝሮች
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| የደጋፊዎች መመዘኛዎች | 4.72"ኤል x 0.98" ዋ x 4.72" ሸ (120ሚሜ x 25 ሚሜ x 120 ሚሜ) |
| የማሽከርከር ፍጥነት | 1600 ± 10% ሩብልስ |
| የአየር ፍሰት | 48.32 ሲኤፍኤም |
| የማይንቀሳቀስ ግፊት | 1.75 mmH₂O |
| የድምጽ ደረጃ | 27.36 dBA |
| የኃይል ማገናኛ አይነት | 4-ፒን PWM |
| RGB Connector Type | 3-Pin ARGB (5V) |
| ጥራዝtage | 5 ቮልት |
| ዋትtage | 1.8 ዋት |
| የማቀዝቀዣ ዘዴ | አየር |
| ተስማሚ መሣሪያዎች | ዴስክቶፕ |
| ቁሳቁስ | Rubber (anti-vibration pads) |
9. ዋስትና እና ድጋፍ
darkFlash provides a 1-year assurance for this PC case fan product. For any product-related inquiries or support, please contact darkFlash customer service through their official channels or the retailer where the product was purchased.
