የአርጎን ኦዲዮ TT MK2 ተርንቴብል የተጠቃሚ መመሪያ

መግቢያ

ስለገዙ እናመሰግናለንasing the Argon Audio TT MK2 Turntable. This manual provides essential information for the safe and optimal operation, setup, and maintenance of your new turntable. Please read this manual thoroughly before using the product and retain it for future reference.

The Argon Audio TT MK2 is designed to deliver high-fidelity audio playback from your vinyl records, featuring a built-in phono pre-amplifier, an Audio Technica AT3600 cartridge, and dual-speed control for 33 and 45 RPM records.

አስፈላጊ የደህንነት መመሪያዎች

በመሳሪያው ላይ የኤሌክትሪክ ንዝረት፣ የእሳት አደጋ ወይም የመጎዳት አደጋን ለመቀነስ እባክዎ የሚከተሉትን የደህንነት ጥንቃቄዎች ይጠብቁ፡-

• ይህንን መሳሪያ ለዝናብ ወይም እርጥበት አያጋልጡ።
• በፈሳሽ የተሞሉ ነገሮችን ለምሳሌ የአበባ ማስቀመጫዎች በመሳሪያው ላይ አታስቀምጡ።
• የአየር ማናፈሻ ክፍተቶችን አያግዱ። በአምራቹ መመሪያ መሰረት ይጫኑ.
• እንደ ራዲያተሮች፣ ሙቀት መመዝገቢያዎች፣ ምድጃዎች፣ ወይም ሌሎች መሳሪያዎችን (ያጠቃልለው) ካሉ የሙቀት ምንጮች አጠገብ አይጫኑ። ampማሞቂያዎች) ሙቀትን ያመነጫሉ.
• የኃይል ገመዱን እንዳይራመዱ ወይም እንዳይቆለፉ በተለይም በመሰኪያዎች ፣ በምቾት መያዣዎች እና ከመሣሪያው የሚወጡበትን ቦታ ይጠብቁ ፡፡
• በአምራቹ የተገለጹ አባሪዎችን/መለዋወጫዎችን ብቻ ይጠቀሙ።
• ይህንን መሳሪያ በመብረቅ አውሎ ንፋስ ወይም ለረጅም ጊዜ ጥቅም ላይ በማይውልበት ጊዜ ይንቀሉት።
• ሁሉንም አገልግሎቶች ብቁ ለሆኑ የአገልግሎት ሰራተኞች ያመልክቱ። አፓርትመንቱ በማናቸውም መንገድ ጉዳት ከደረሰ በኋላ ማገልገል ያስፈልጋል፣ ለምሳሌ የኃይል ማስተላለፊያ ገመድ ወይም መሰኪያ ሲበላሽ፣ ፈሳሽ ሲፈስ ወይም ዕቃው ውስጥ ሲወድቅ፣ መሳሪያው ለዝናብ ወይም ለእርጥበት ሲጋለጥ፣ መደበኛውን የማይሰራ ከሆነ። , ወይም ተጥሏል.

በሣጥኑ ውስጥ ያለው

Carefully unpack all components and ensure all items are present before discarding packaging materials:

• Argon Audio TT MK2 Turntable Unit
• Audio Technica AT3600 Cartridge (pre-mounted)
• Dust Lid
• RCA ኬብል
• የኃይል አስማሚ
• የክብደት ክብደት
• ፀረ-ስኬት ክብደት
• Platter and Drive Belt
• ተሰማኝ ማት

Image: The Argon Audio TT MK2 Turntable with its clear dust cover in place, showcasing its sleek black finish.

የማዋቀር መመሪያ

1. አቀማመጥ

Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure there is enough space around the unit for ventilation and operation.

2. የፕላስተር እና ቀበቶ መትከል

1. Carefully place the metal platter onto the spindle.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and hook it onto the motor pulley. Ensure the belt is not twisted.
3. የተሰማውን ምንጣፍ በሳህኑ ላይ ያስቀምጡት.

Image: The Argon Audio TT MK2 Turntable with its dust cover removed, showing the platter and tonearm assembly.

3. Cartridge and Tonearm Setup

The Audio Technica AT3600 cartridge comes pre-mounted on the tonearm. Follow these steps to balance the tonearm and set the tracking force:

1. የስታይለስ መከላከያውን ከካርቶሪው ውስጥ ያስወግዱ።
2. የቶኔክ ክንዱን ከቀሪው ቀስ ብለው ይልቀቁት።
3. Rotate the counterweight at the rear of the tonearm until the tonearm floats freely and is perfectly balanced horizontally.
4. Once balanced, hold the counterweight steady and rotate the numbered ring on the front of the counterweight to "0".
5. Rotate the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is set. For the AT3600 cartridge, the recommended tracking force is typically 3.5 grams.

ምስል፡ መቀራረብ view of the tonearm's counterweight and anti-skate mechanism, showing the numerical scale for adjustment.

4. Anti-Skate Adjustment

Attach the anti-skate weight to the small loop on the tonearm and hang it over the second groove of the anti-skate support rod. This helps prevent the stylus from skipping inwards.

5. ከድምጽ ስርዓት ጋር መገናኘት

The TT MK2 features a built-in phono pre-amplifier, allowing direct connection to powered speakers or an amplifier's line-level input. If your amplifier has a dedicated "Phono" input, you can bypass the internal pre-amp.

1. Connect the supplied RCA cable from the "RCA OUT" jacks on the rear of the turntable to the corresponding input on your amplifier or powered speakers (e.g., "AUX", "LINE IN").
2. Locate the "RIAA" switch on the rear of the turntable.
   • Set the switch to "ON" if connecting to a line-level input (e.g., AUX, CD) on your amplifier or directly to powered speakers. This activates the internal phono pre-ampማብሰያ
   • Set the switch to "OFF" if connecting to a dedicated "Phono" input on your amplifier. This bypasses the internal phono pre-amplifier, as your amplifier will provide the necessary RIAA equalization.

Image: The rear panel of the Argon Audio TT MK2 Turntable, showing the RCA output jacks, the RIAA (Phono/Line) switch, and the DC 12V power input.

6. የኃይል ግንኙነት

Connect the supplied power adapter to the "DC IN 12V" port on the rear of the turntable, then plug the adapter into a wall outlet.

የአሠራር መመሪያዎች

1. ማብራት / ማጥፋት

Use the power switch located on the rear panel to turn the turntable ON or OFF.

2. Selecting Playback Speed

The TT MK2 supports two playback speeds: 33 1/3 RPM for LPs and 45 RPM for singles. Use the speed selection knob on the top right of the turntable to switch between "33" and "45".

Image: A close-up of the Audio Technica AT3600 cartridge mounted on the tonearm, alongside the "STOP" and "START" buttons and the 33/45 RPM speed selection knob.

3. መዝገብ መጫወት

1. Place a record on the platter, ensuring it is centered.
2. Select the correct speed (33 or 45 RPM) using the speed knob.
3. Press the "START" button. The platter will begin to rotate.
4. የቃና ክንዱን ቀስ ብለው በማንሳት የቃናውን ማንሻ (cueing lever) ይጠቀሙ።
5. የቶና አርሙን በሚፈለገው የመዝገቡ የመጀመሪያ ጎድጎድ ላይ ያስቀምጡት።
6. Slowly lower the cueing lever to gently drop the stylus onto the record.

4. መልሶ ማጫወትን ማቆም

1. At the end of a record, the tonearm will not automatically return. Gently lift the tonearm using the cueing lever.
2. Return the tonearm to its rest and secure it with the tonearm clip.
3. Press the "STOP" button to halt platter rotation.
4. Carefully remove the record.

ጥገና

1. ስቲለስን ማጽዳት

The stylus (needle) should be cleaned regularly to ensure optimal sound quality and prevent damage to your records. Use a soft brush designed for stylus cleaning, brushing gently from back to front (away from the cantilever).

2. የጽዳት መዝገቦች

Always handle records by their edges. Use a carbon fiber brush or a dedicated record cleaning solution and cloth to remove dust and debris before each play.

3. ማዞሪያውን ማጽዳት

Wipe the turntable chassis and dust cover with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp ጨርቅ መጠቀም ይቻላል፣ ከዚያም ደረቅ ጨርቅ መጠቀም ይቻላል። ጠበኛ ኬሚካሎችን ወይም ሻካራ ማጽጃዎችን ከመጠቀም ይቆጠቡ።

4. የአቧራ ሽፋን እንክብካቤ

The dust cover protects your turntable from dust. When not in use, keep the dust cover closed. Clean it gently with a soft, damp cloth to avoid scratching the acrylic surface.

መላ መፈለግ

If you experience issues with your Argon Audio TT MK2 Turntable, please consult the following table before contacting support:

ዝርዝሮች

ዋስትና እና ድጋፍ

Argon Audio products are designed and manufactured to the highest quality standards. This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Argon Audio webለዝርዝር የዋስትና ውሎች እና ሁኔታዎች ጣቢያ።

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your authorized Argon Audio dealer or Argon Audio customer service directly. Contact information can typically be found on the Argon Audio webጣቢያ.