ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. መግቢያ

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

ምስል 1.1፡ ፊት view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. የደህንነት መረጃ

የእሳት፣ የኤሌክትሪክ ንዝረት ወይም የግል ጉዳት ስጋትን ለመቀነስ ሁል ጊዜ እነዚህን መሰረታዊ የደህንነት ጥንቃቄዎች ይከተሉ፡-

• ማስጠንቀቂያ: የኤሌክትሪክ ንዝረት አደጋ. ከመጫንዎ ወይም ከማገልገልዎ በፊት ኃይልን በ fuse ወይም circuit breaker ያላቅቁ።
• ይህ ምርት በሚመለከተው የመጫኛ ኮድ መሰረት የምርቱን ግንባታ እና አሰራር እና አደጋን የሚያውቅ ሰው መጫን አለበት።
• Use only 120V AC, 60Hz circuits.
• Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
• ሁሉም ግንኙነቶች ደህንነታቸው የተጠበቀ እና በትክክል የተከለሉ መሆናቸውን ያረጋግጡ።
• ይህ መሳሪያ ለቤት ውስጥ አገልግሎት ብቻ ተስማሚ ነው.

3. የጥቅል ይዘቶች

መጫኑን ከመጀመርዎ በፊት ሁሉም አካላት መኖራቸውን ያረጋግጡ-

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• ሃርድዌር ማፈናጠጥ (ስፒንች፣ ሽቦ ለውዝ)
• E26 Adapter Accessories (for recessed can installation)
• የትምህርት መመሪያ (ይህ ሰነድ)

ምስል 3.1፡ ለመጫን የተካተቱ መለዋወጫዎች።

4. የምርት ባህሪዎች

• 3CCT Selectable: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• የእንቅስቃሴ ዳሳሽ፡- Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• የሚስተካከል የጊዜ መዘግየት Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• የብርሃን ዳሳሽ፡- The motion sensor functions only in dark environments, remaining off during daylight hours.
• ኃይል ቆጣቢ፡ 16W LED provides 1000 lumens of brightness.
• ሁለገብ ጭነት; Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. ማዋቀር እና መጫን

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. የመጋጠሚያ ሣጥን መጫኛ

1. ሌንሱን በሰዓት አቅጣጫ በማዞር ያስወግዱት.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. ሌንሱን በሰዓት አቅጣጫ በማዞር ያስወግዱት.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. የአሠራር መመሪያዎች

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. የእንቅስቃሴ ዳሳሽ ተግባር

• የቀን ሰዓት፡ The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. ኃይሉ መጥፋቱን ያረጋግጡ።
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. ኃይሉ መጥፋቱን ያረጋግጡ።
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. ጥገና

The ECOELER LED ceiling light requires minimal maintenance.

• ማጽዳት፡ ከማጽዳትዎ በፊት ኃይሉ መጥፋቱን ያረጋግጡ። እቃውን ለስላሳ, ደረቅ ወይም በትንሹ ይጥረጉ መamp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• መነፅር Keep the lens clean to ensure optimal light output and motion sensor performance.

8. መላ መፈለግ

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. ዝርዝሮች

10. ዋስትና እና ድጋፍ

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webጣቢያ.

አምራች፡ ECOELER ELECTRIC INC