1. መግቢያ
The TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73) is designed for precise temperature monitoring in refrigerators, freezers, water baths, heating blocks, and incubators. This device simultaneously displays current, minimum, and maximum temperatures, offering a comprehensive overview of environmental conditions. Its built-in memory stores temperature data, and programmable alarms provide alerts for critical temperature deviations.
ቁልፍ ባህሪዎች
- Simultaneous display of current, minimum, and maximum temperatures.
- Built-in memory for tracking temperature conditions over time.
- Precise high and low temperature alarms, adjustable in 1° increments.
- Submersible temperature probe with a 10-ft (3-m) micro-cable.
- Multiple mounting options: hook-and-loop strips, wall-mount slots, or flip-open stand.
- NIST-traceable calibration certificate included.
2. የጥቅል ይዘቶች
Verify that all items listed below are present and in good condition:
- TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73)
- 1 5-mL Bottle Probe (submersible)
- ከውሂብ ጋር በNIST ሊከታተል የሚችል የልኬት ሰርተፊኬት
- Hook-and-loop strips for mounting
- Magnetic strips for mounting
- አንድ AAA የአልካላይን ባትሪ
3. ማዋቀር
3.1. የባትሪ ጭነት
- የባትሪውን ክፍል በቤቱ ጀርባ ላይ ያግኙት።
- የባትሪውን ክፍል ሽፋን ያስወግዱ.
- Insert the supplied AAA alkaline battery, ensuring correct polarity (+/-).
- የባትሪውን ክፍል ደህንነቱ በተጠበቀ ሁኔታ ይተኩ.
3.2. የምርመራ አቀማመጥ
The bottle probe is designed to buffer rapid temperature changes, providing a more stable and accurate reading of the stored contents. The 10-ft (3-m) micro-cable allows the probe to be placed inside the monitored environment while the main unit remains outside.
- Place the bottle probe inside the refrigerator, freezer, or other environment where temperature monitoring is required. Ensure the probe is positioned to accurately reflect the temperature of the items being stored.
- The micro-cable is thin enough to allow refrigerator or freezer doors to close without damaging the cable or compromising the seal.
Image: A person placing a bottle probe inside a refrigerator, demonstrating proper probe placement.
3.3. ዋናውን ክፍል መትከል
The main thermometer unit can be mounted in several ways:
- Hook-and-Loop Strips: Attach the adhesive-backed hook-and-loop strips to the back of the unit and a clean, flat surface (e.g., side of a refrigerator, wall).
- Magnetic Strips: Use the magnetic strips for attachment to metallic surfaces.
- Wall-Mount Slots: Utilize the integrated slots on the back of the unit to hang it on screws or hooks.
- Flip-Open Stand: For benchtop use, extend the integrated stand on the back of the unit.
Image: A hand pressing a button on the TRACEABLE thermometer, which is mounted on the exterior of a refrigerator.
4. የአሠራር መመሪያዎች
4.1. ማብራት / ማጥፋት
The unit powers on automatically upon battery installation. There is no dedicated power button. To turn off, remove the battery.
4.2. የንባብ ሙቀቶች
The large LCD display shows three temperature readings simultaneously:
- የአሁኑ ሙቀት፡ The real-time temperature measured by the probe.
- Minimum Temperature (MIN): The lowest temperature recorded since the last reset.
- Maximum Temperature (MAX): The highest temperature recorded since the last reset.
4.3. የሙቀት መጠን አሃዶችን መቀየር (°ፋ/°ሴ)
የሚለውን ይጫኑ °F/°ሴ button (if available, or a similar labeled button) to toggle between Fahrenheit and Celsius temperature scales.
4.4. Viewing and Clearing Min/Max Memory
The thermometer automatically records the minimum and maximum temperatures reached since the last memory reset. These values are continuously displayed.
- To clear the MIN/MAX memory and begin a new recording cycle, press the አጽዳ button. The display will show the current temperature for MIN and MAX until new minimum and maximum values are recorded.
4.5. ማንቂያዎችን ማዘጋጀት
The thermometer features programmable high and low temperature alarms. An alarm will sound when the temperature exceeds the high set point or falls below the low set point. The alarm continues to sound even if the temperature returns to the non-alarm range until acknowledged.
- የሚለውን ይጫኑ አዘጋጅ የማንቂያ ቅንብር ሁነታን ለማስገባት አዝራር.
- የሚለውን ተጠቀም UP እና ታች arrow buttons to adjust the desired high temperature alarm limit.
- ተጫን አዘጋጅ again to confirm the high limit and proceed to set the low temperature alarm limit.
- የሚለውን ተጠቀም UP እና ታች arrow buttons to adjust the desired low temperature alarm limit.
- ተጫን አዘጋጅ a third time to exit alarm setting mode and save the settings.
- To enable or disable the alarm, press the ማንቂያ በርቷል / አጥፋ button. An alarm icon will typically appear on the display when the alarm is active.
- To silence a sounding alarm, press any button. The alarm will reactivate if the temperature remains outside the set limits.
5. ጥገና
5.1. ማጽዳት
Regular cleaning helps maintain the accuracy and longevity of your thermometer.
- Wipe the main unit and probe with a damp cloth. A mild soap solution can be used if necessary.
- Do not use abrasive cleaners or solvents, as these may damage the plastic casing ወይም ማሳያ.
- Ensure the main unit does not get wet, as it is not waterproof. The probe is submersible.
5.2. የባትሪ መተካት
When the display becomes dim or the unit stops functioning, it is time to replace the battery. Refer to Section 3.1 for battery installation instructions.
5.3. የመመርመሪያ እንክብካቤ
The bottle probe is designed for durability. Avoid sharp bends or kinks in the cable, which could damage the internal wiring. The probe is freezer safe and can remain in the monitored environment continuously.
6. መላ መፈለግ
If your thermometer is not functioning as expected, please refer to the following common issues and solutions:
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ምንም ማሳያ ወይም ደብዛዛ ማሳያ የለም። | የሞተ ወይም አላግባብ የተጫነ ባትሪ | የ AAA ባትሪውን ይተኩት፣ ትክክለኛውን ፖላራይት ያረጋግጡ። |
| ትክክል ያልሆነ የሙቀት ንባቦች | Probe not properly placed or damaged | Ensure the probe is fully immersed or correctly positioned. Inspect the probe and cable for damage. |
| ማንቂያ አይሰማም። | Alarm disabled or settings incorrect | Verify that the alarm is enabled (check for alarm icon) and that high/low limits are set appropriately. |
| የMIN/MAX እሴቶች ዳግም አልተጀመሩም | CLEAR button not pressed | የሚለውን ይጫኑ አጽዳ button to reset the memory. |
7. ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| የሞዴል ቁጥር | አኦ-94460-73 |
| የሙቀት ክልል | −58 to 158°F (–50 to 70°C) |
| ጥራት | 0.1° |
| ትክክለኛነት | ± 1 ° ሴ |
| የመርማሪ ገመድ ርዝመት | 10 ft (3 m) micro-cable |
| የኃይል ምንጭ | 1 x AAA የአልካላይን ባትሪ |
| የማሳያ ዓይነት | ዲጂታል ኤል.ሲ.ዲ. |
| ልዩ ባህሪ | High Accuracy, NIST-traceable calibration |
| የምርት እንክብካቤ መመሪያዎች | Freezer Safe (probe) |
| የመጫኛ አማራጮች | Hook-and-loop, Magnetic, Wall-mount, Benchtop stand |
8. ዋስትና
This TRACEABLE product is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage caused by accident, misuse, abuse, alteration, or improper operation. If service is required during the warranty period, please contact customer support.
9. የደንበኛ ድጋፍ
For technical assistance, warranty claims, or general inquiries, please contact TRACEABLE customer support. Refer to the contact information provided with your purchase documentation or visit the official TRACEABLE webበጣም ወቅታዊ የድጋፍ ዝርዝሮች ለማግኘት ጣቢያ.
የመስመር ላይ መርጃዎች፡-
- ን ይጎብኙ ይተቻል webጣቢያ for product information, FAQs, and additional resources.
