1. ጠቃሚ የደህንነት መመሪያዎች
Please read all instructions before using this sewing machine. This machine is intended for household use only.
DANGER - To reduce the risk of electric shock:
- አንድ መሳሪያ ሲሰካ ያለ ክትትል መተው የለበትም።
- ከተጠቀሙበት በኋላ እና ከማፅዳቱ በፊት ይህንን መሳሪያ ሁል ጊዜ ከኤሌክትሪክ መሰኪያ ያውጡ።
- ከዳግም ኤል በፊት ሁልጊዜ ይንቀሉamping አምፖሉን 15 ዋት (110-120 ቮ አካባቢ) ወይም 15 ዋት (220-240 ቮ አካባቢ) በተሰየመ ተመሳሳይ ዓይነት ይተኩ።
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
- እንደ አሻንጉሊት መጠቀም አትፍቀድ. ይህ መሳሪያ በልጆች ወይም በአቅራቢያው በሚውልበት ጊዜ የቅርብ ትኩረት አስፈላጊ ነው.
- በዚህ ማኑዋል ውስጥ እንደተገለጸው ይህንን መሳሪያ ለታለመለት ጥቅም ብቻ ይጠቀሙበት። በዚህ ማኑዋል ውስጥ እንደተካተቱት በአምራቹ የተጠቆሙትን አባሪዎችን ብቻ ይጠቀሙ።
- ይህ መሳሪያ የተበላሸ ገመድ ወይም መሰኪያ ካለው፣ በትክክል የማይሰራ ከሆነ፣ ከተጣለ ወይም ከተበላሸ ወይም ወደ ውሃ ከተጣለ ይህን መሳሪያ በጭራሽ አይጠቀሙት። ለምርመራ፣ ለመጠገን፣ ለኤሌክትሪክ ወይም ለሜካኒካል ማስተካከያ መሳሪያውን በአቅራቢያው ወደሚገኝ የተፈቀደ አከፋፋይ ወይም የአገልግሎት ማእከል ይመልሱ።
- መሳሪያውን በምንም አይነት የአየር መክፈቻዎች ታግዶ አይጠቀሙ። የልብስ ስፌት ማሽን እና የእግር መቆጣጠሪያ የአየር ማናፈሻ ክፍተቶችን ከተከማቸ ፣ ከአቧራ እና ከላላ ጨርቅ ነፃ ያድርጉት።
- ጣቶች ከሁሉም ተንቀሳቃሽ ክፍሎች ይራቁ ፡፡ በስፌት ማሽኑ መርፌ ዙሪያ ልዩ ጥንቃቄ ያስፈልጋል ፡፡
- ሁልጊዜ ተገቢውን መርፌ ሰሃን ይጠቀሙ. የተሳሳተ ሰሃን መርፌው እንዲሰበር ሊያደርግ ይችላል.
- የታጠፈ መርፌዎችን አይጠቀሙ.
- በሚሰፋበት ጊዜ ጨርቅ አይጎትቱ ወይም አይግፉ. መርፌው እንዲሰበር የሚያደርገውን አቅጣጫ ሊያዞር ይችላል።
- Always unplug sewing machine off ("O") when making any adjustments in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like.
- ሽፋኖችን ሲያስወግዱ ፣ ሲቀቡ ወይም በመመሪያው መመሪያ ውስጥ የተጠቀሱትን ማንኛውንም የተጠቃሚ ማስተካከያ ሲያደርጉ ሁል ጊዜ የልብስ ስፌት ማሽንን ከኤሌክትሪክ ሶኬት ይንቀሉ።
- በማንኛውም መክፈቻ ውስጥ ማንኛውንም ነገር አይጣሉ ወይም አያስገቡ።
- ከቤት ውጭ አይጠቀሙ.
- ኤሮሶል የሚረጭ ምርቶች ጥቅም ላይ በሚውሉበት ቦታ ወይም ኦክስጅንን በሚሰጥበት ቦታ አይሠሩ ፡፡
- To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.
- ገመዱን በማንሳት አይንቀሉት። ሶኬቱን ለመንቀል ገመዱን ሳይሆን መሰኪያውን ይያዙ።
- በመደበኛ የሥራ ሁኔታዎች ውስጥ ያለው የድምፅ ግፊት መጠን 75 ዲቢቢ (A) ነው።
- Always turn off the machine or unplug when the machine is not operating properly.
- ምንም ነገር በእግር መቆጣጠሪያ ላይ በጭራሽ አታስቀምጥ።
- If the supply cord to the foot controller is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
- ይህ መሳሪያ ለደህንነታቸው ኃላፊነት ባለው ሰው ቁጥጥር ወይም መመሪያ ካልተሰጣቸው በስተቀር የአካል፣ የስሜት ወይም የአዕምሮ ችሎታዎች ወይም የልምድ እና የእውቀት እጥረት ላላቸው ሰዎች (ልጆችን ጨምሮ) ለመጠቀም የታሰበ አይደለም።
- ልጆች ከመሳሪያው ጋር እንደማይጫወቱ ለማረጋገጥ ክትትል ሊደረግባቸው ይገባል.
እነዚህን መመሪያዎች ያስቀምጡ
Image: Important Safety Instructions page from the Singer 2250 manual, detailing electrical and general safety warnings.
2. ማዋቀር
2.1 መለዋወጫዎች
The Singer 2250 sewing machine comes with a set of standard accessories and supports various optional accessories for different sewing tasks.
- መደበኛ መለዋወጫዎች፡ All purpose foot, Button sewing foot, Zipper foot, Screwdriver, Seam ripper/brush, Pack of needles, Bobbin (3), Darning plate, Spool holder.
- Optional Accessories (not supplied with machine, available from SINGER® retailers): Edge/quilting guide, Zipper foot, Straight stitch foot, Overcasting foot, Hemmer foot, Blind hem foot, Satin stitch foot, Cording/embroidery foot, Second spool pin, Spool pin felt.
2.2 የቦቢን መጠምዘዝ
- Place thread and corresponding spool holder onto the spool pin.
- Snap the thread into the thread guide.
- Wind the thread counterclockwise around the bobbin winder tension disc.
- Thread the bobbin as illustrated and place it on the spindle.
- Push the bobbin spindle to the right.
- Hold the thread end.
- Step on the foot control pedal to begin winding.
- Cut the thread once the bobbin is full.
- Push the bobbin spindle to the left and remove the wound bobbin.
እባክዎን ያስተውሉ፡ When the bobbin winder spindle is in the "bobbin winding" position, the machine will not sew and the hand wheel will not turn. To start sewing, push the bobbin winder spindle to the left (sewing position).
Image: Manual page illustrating standard and optional accessories, and a step-by-step guide for winding the bobbin.
2.3 ከኃይል ምንጭ ጋር መገናኘት
Ensure the machine's power switch is in the "O" (off) position. Insert the machine plug into the electrical outlet. Always use a grounded outlet.
2.4 Raising the Presser Foot Lifter
The presser foot lifter is located at the back of the needle bar area. Lift it to raise the presser foot for placing fabric, and lower it to hold the fabric in place for sewing.
3. ኦፕሬሽን
3.1 Choosing Your Pattern
The Singer 2250 features a Pattern Selector Dial to choose various stitch patterns.
- Stitches indicated in black on the diagram correspond to the Pattern Selector Dial.
- For patterns indicated with the "S" color, turn the Pattern Selector Dial to "S", then use the Stitch Length Dial to adjust the desired stitch length.
- The Pattern Selector Dial can be turned in either direction.
3.2 Stitch Length Dial
The Stitch Length Dial controls the length of straight stitches and the density of zig-zag stitches.
- For Straight Stitching: Turn the Pattern Selector Dial to the straight stitch symbol. The stitch length increases as the dial approaches "4". Use longer stitches for heavier fabrics and thicker needles, shorter stitches for lighter fabrics and finer needles.
- For Zig-Zag Stitching: Turn the Pattern Selector Dial to "~~~ ". The density of zig-zag stitches increases as the setting of the stitch length dial approaches "0". Dense zig-zag stitches are known as satin stitches.
Image: Manual page detailing how to choose stitch patterns and adjust stitch length for various sewing applications.
3.3 ማሽኑን መፈተሽ
Proper threading is crucial for smooth sewing. Follow these general steps:
- የክር ክርውን በስፖን ፒን ላይ ያስቀምጡ።
- Guide the thread through the upper thread guides.
- ክርውን በውጥረት ዲስኮች ውስጥ ያስተላልፉ።
- ክርውን ወደ ላይ በማውጣት ማንሻ በኩል ያዙሩት።
- Guide the thread down through the needle bar thread guide.
- መርፌውን ከፊት ወደ ኋላ ይከርክሙት.
- Raise the bobbin thread by turning the handwheel towards you, catching the bobbin thread with the needle thread.
- Pull both threads under the presser foot and towards the back.
3.4 Sewing on Buttons
To sew buttons using your Singer 2250:
- የጨለመውን ሳህን ይጫኑ።
- Change the all-purpose foot to the button sewing tool.
- Position the fabric and button under the foot.
- Lower the button to the desired position and lower the foot.
- Set the Pattern Selector Dial on "---" and sew a few securing stitches.
- Select one of the two narrow zig-zag patterns (between 0.5 and 1.5) and sew through both holes of the button. Turn the handwheel to check needle clearance.
- Slowly sew the button with about 10 stitches.
- Select pattern "---" again and sew a few securing stitches.
- If a shank is required, place a darning needle on top of the button and sew.
- For buttons with 4 holes, sew through the front two holes first, then sew backwards and then sew through the back two holes.
3.5 Installing the Removable Extension Table
The removable extension table provides a larger work surface and also serves as an accessory box.
- ለመጫን፡- Hold the removable extension table horizontally and push it in the direction of the arrow until it clicks into place.
- ለማስወገድ፡- Pull the extension table towards the left.
- The inside of the removable extension table can be used as an accessory box. To open, flip the cover down.
4. ጥገና
4.1 የዳርኒንግ ፕሌት
The darning plate is used for specific tasks like darning or free-hand embroidery.
- መጫን፡ Install the darning plate as illustrated in the manual.
- ማስወገድ፡ ለመደበኛ ስፌት ፣ የጨለመውን ሳህን ያስወግዱ።
- For free-motion sewing, a darning/embroidery foot (optional accessory) is recommended.
4.2 Inserting & Changing Needles
Regularly change your needle, especially if sewing problems occur. Use SINGER® Brand Needles for best results.
- Turn the power switch to off ("O").
- መርፌውን ይፍቱ clamp ጠመዝማዛ
- Insert the new needle with the flat side of the shaft facing the back, pushing it up as far as it will go.
- መርፌውን በጥብቅ ይዝጉት clamp ጠመዝማዛ
ትኩረት፡ Needles must be in perfect condition. Problems can occur with bent needles, damaged points, or blunt needles.
4.3 Changing the Bulb
To change the light bulb, ensure the machine is unplugged. Replace the bulb with the same type rated 15 watts (110-120V area) or 15 watts (220-240V area).
4.4 ጽዳት
Regularly clean the lint and dust from the bobbin case area and feed dogs using the provided brush. Ensure the machine is unplugged before cleaning.
Image: Manual page illustrating procedures for sewing on buttons, installing the extension table, using the darning plate, and changing needles.
5. መላ መፈለግ
If you encounter issues with your Singer 2250, refer to the following common problems and solutions:
- የተዘለሉ ስፌቶች; Ensure the needle is inserted correctly, not bent, and is the appropriate size for the fabric and thread. Re-thread the machine.
- ክር መስበር፡ Check for correct threading, proper tension, a bent or blunt needle, or burrs on the needle plate or bobbin case.
- የጨርቅ መጎተት; Adjust tension settings, use the correct needle size, or ensure the presser foot pressure is appropriate for the fabric.
- ማሽን የማይመግብ ጨርቅ፡ Check if the feed dogs are raised. Ensure the presser foot is lowered.
- ጫጫታ ያለው አሠራር; Clean and lubricate the machine as per maintenance instructions. Check for loose parts or a bent needle.
For persistent problems, contact an authorized Singer service center.
6. ዝርዝሮች
| የምርት ልኬቶች | 8.5 x 5.5 x 0.1 ኢንች |
| የእቃው ክብደት | 3 አውንስ |
| የሞዴል ቁጥር | SINGER 2250 Manual |
| አምራች | TabSynth Design (for reproduction manual) |
| ASIN | B0G19M5M63 |
7. ዋስትና እና ድጋፍ
This instruction manual is a reproduction for the Singer 2250 Sewing Machine. For warranty information regarding your Singer 2250 sewing machine, please refer to the original documentation provided with your machine or contact Singer customer support directly.
For support related to the operation or maintenance of your Singer 2250, please consult this manual. If further assistance is needed, contact an authorized Singer service center or your local Singer dealer.
