YESWELDER Replacement Lenses for LYG-M800H and 17800F Welding Helmets (JP01-M800H-BL)

መግቢያ

This manual provides instructions for the proper installation, use, and maintenance of your YESWELDER Blue Light Blocking Outer and Inner Replacement Lenses. These lenses are specifically designed for compatibility with YESWELDER LYG-M800H and 17800F welding helmets. Adhering to these instructions will ensure optimal performance and longevity of the product.

የደህንነት መረጃ

Always ensure your welding helmet is turned off and disconnected from any power source before attempting to replace lenses.
Wear appropriate personal protective equipment (PPE), such as gloves, when handling lenses to prevent fingerprints and scratches.
Inspect new lenses for any defects or damage before installation. Do not use damaged lenses.
These lenses are replacement parts for specific welding helmets. They do not provide primary eye protection on their own. Always use them in conjunction with a functional welding helmet.

የጥቅል ይዘቶች

ሁሉም ክፍሎች በጥቅልዎ ውስጥ መኖራቸውን ያረጋግጡ፡-

5 x Blue Light Blocking Outer Replacement Lenses (5.23'' x 4.72'', thickness: 0.04'')
2 x Inner Replacement Lenses (4.05'' x 3.85'', thickness: 0.04'')

YESWELDER Blue Light Blocking Outer and Inner Replacement Lenses

Image: Contents of the YESWELDER replacement lens package, showing multiple outer and inner lenses.

ማዋቀር እና መጫን

Follow these steps to correctly install the replacement lenses into your YESWELDER LYG-M800H or 17800F welding helmet.

የራስ ቁርን ያዘጋጁ: Open the front cover of your welding helmet. Locate the existing outer and inner lenses.
Remove Old Lenses: Carefully unclip or slide out the worn or damaged outer and inner lenses from their respective slots. Dispose of old lenses responsibly.
Prepare New Lenses: ጠቃሚ፡- Both sides of the new lenses are protected by a thin plastic film. Gently peel off this protective film from both surfaces of each new lens (outer and inner) before installation. Failure to remove the film will result in blurry vision.
Install Inner Lens: Slide the new inner replacement lens into the designated inner slot of the helmet. Ensure it sits flush and securely.
Install Outer Lens: Slide the new blue light blocking outer replacement lens into the outer slot. Ensure it is properly seated and secured by the helmet's retaining clips or frame.
Close Helmet Cover: Close the front cover of the welding helmet, ensuring all components are securely in place.
የተግባር ማረጋገጫ፡- Before welding, perform a quick visual check to ensure clear vision through the lenses and that they are free from dust or smudges.

በመስራት ላይ

Once installed, the blue light blocking outer lenses provide advanced eye protection by filtering out harmful high-energy blue light rays, while allowing less harmful portions of the blue light spectrum to pass through. This technology is designed to enhance eye comfort and safety during extended welding sessions. The inner lenses provide an additional layer of protection and clarity.

ጥገና

ማጽዳት፡ Clean lenses regularly with a soft, lint-free cloth and a mild lens cleaning solution. Avoid abrasive materials or harsh chemicals that can scratch or damage the lens coating.
ምርመራ፡- Periodically inspect both outer and inner lenses for scratches, cracks, or excessive spatter buildup. Replace lenses immediately if they show signs of damage that could impair vision or protection.
ማከማቻ፡ Store unused replacement lenses in their original packaging or a clean, dry, and protected environment to prevent scratches and dust accumulation.

መላ መፈለግ

ችግር	ሊሆን የሚችል ምክንያት	መፍትሄ
Vision is blurry or unclear.	Protective film not removed; smudges or dirt on lens; lens scratched.	Ensure protective film is removed from both sides. Clean lenses with a soft cloth. Replace if scratched.
Lenses do not fit securely.	Incorrect lens size; improper installation.	Verify you have the correct model lenses (JP01-M800H-BL). Re-install, ensuring lenses are fully seated in their slots.
Excessive glare or discomfort.	Outer lens is heavily scratched or covered in spatter.	Replace the outer lens. Clean the lens regularly to prevent spatter buildup.

ዝርዝሮች

Outer Lens Dimensions: 5.23 ኢንች x 4.72 ኢንች
Outer Lens Thickness: 0.04 ኢንች
Inner Lens Dimensions: 4.05 ኢንች x 3.85 ኢንች
Inner Lens Thickness: 0.04 ኢንች
ተኳኋኝነት YESWELDER LYG-M800H and 17800F Welding Helmets
ባህሪ፡ Blue Light Blocking Technology (Outer Lenses)
የንጥል ክብደት (ጥቅል) በግምት 4.6 አውንስ
የጥቅል መጠኖች: 5.39 x 4.76 x 0.39 ኢንች

ዋስትና

For detailed warranty information regarding your YESWELDER replacement lenses, please refer to the official YESWELDER webጣቢያ ወይም የደንበኞቻቸውን ድጋፍ በቀጥታ ያነጋግሩ። የዋስትና ውሎች እና ሁኔታዎች ሊለያዩ ይችላሉ።

ድጋፍ

If you require further assistance or have questions not covered in this manual, please contact YESWELDER customer support through their official webጣቢያው ወይም ምርቱን የገዙበት ቸርቻሪ።

Webጣቢያ፡ የYESWELDER መደብርን በአማዞን ይጎብኙ

	YESWELDER LYG-Q800D ተከታታይ ራስ-አጨልም ብየዳ የራስ ቁር ኦፕሬተር መመሪያ የYESWELDER LYG-Q800D ተከታታይ አውቶማቲክ የማጨለም ብየዳ የራስ ቁር፣ የደህንነት ጥንቃቄዎችን፣ ዝርዝር መግለጫዎችን፣ የአሠራር መመሪያዎችን፣ ማስተካከያዎችን፣ ጥገናን፣ መላ መፈለግን እና የዋስትና መረጃዎችን የሚሸፍን የኦፕሬተር መመሪያ።
	የዬስዌልደር LYG-L600A ተከታታይ አውቶማቲክ ጨለማ የብየዳ የራስ ቁር ኦፕሬተር መመሪያ ለYESWELDER LYG-L600A ተከታታይ አውቶማቲክ የማጨለም የራስ ቁር፣ የደህንነት ጥንቃቄዎችን፣ ዝርዝር መግለጫዎችን፣ የአሠራር መመሪያዎችን፣ ጥገናን፣ መላ መፈለግን እና ለሞዴሎች MX-L፣ LY600 እና LYG-0L-6000 የዋስትና መረጃን ጨምሮ አጠቃላይ የኦፕሬተር መመሪያ።
	YESWELDER LYG-Q800D ተከታታይ ራስ-አጨልም ብየዳ የራስ ቁር ኦፕሬተር መመሪያ ለYESWELDER LYG-Q800D ተከታታይ ራስ-ጨለማ ብየዳ የራስ ቁር አጠቃላይ ከዋኝ መመሪያ። የደህንነት ጥንቃቄዎችን፣ ዝርዝሮችን፣ የአሰራር መመሪያዎችን፣ ጥገናን፣ መላ ፍለጋን እና የዋስትና መረጃን ይሸፍናል።
	YesWelder LYG-L500A ተከታታይ ራስ-አጨልም ብየዳ የራስ ቁር ኦፕሬተር መመሪያ የኦፕሬተር ማኑዋል ለ YesWelder LYG-L500A Series ራስ-አጨልሚ የመበየድ የራስ ቁር፣ የደህንነት ጥንቃቄዎችን፣ ዝርዝሮችን፣ የአሰራር መመሪያዎችን፣ የጥገናን፣ መላ ፍለጋን እና የዋስትና መረጃን የሚሸፍን።
	የዬስዌልደር አውቶማቲክ ጨለማ የብየዳ የራስ ቁር መመሪያ መመሪያ የYESWELDER ራስ-ሰር ጨለማ የብየዳ የራስ ቁር አጠቃላይ የመመሪያ መመሪያ፣ ባህሪያቱን፣ የአሠራር መርሆቹን፣ ቴክኒካዊ ዝርዝሮችን፣ መገጣጠሚያውን፣ የአጠቃቀም መመሪያዎቹን፣ የጥገና፣ የዋስትና እና የማከማቻ መመሪያዎችን በዝርዝር ያቀርባል።
	የዬስዌልደር MIG-205DS የብየዳ ቅንብሮች እና መመሪያ የYESWELDER MIG-205DS ብየዳ ዝርዝር የብየዳ መለኪያዎች፣ የፍጆታ ዕቃዎች እና የአሠራር መመሪያ። የMAG፣ CO2፣ Gasless፣ Lift TIG እና ARC ብየዳ ሂደቶችን ይሸፍናል፣ ይህም የሽቦ ምርጫን፣ የአሁኑን፣ ጥራዝን ጨምሮtagኢ፣ እና የጋዝ ፍሰት መጠኖች።

YESWELDER JP01-M800H-BL

YESWELDER Replacement Lenses Instruction Manual