አውቶሜትድ AMX Pulse PRO Hub
አውቶሜትድ PULSE PRO OVERVIEW
አውቶሜትድ የሞተር ሼዶችን ወደ AMX ዘመናዊ የቤት መቆጣጠሪያ ስርዓቶች በማዋሃድ የእርስዎን አውቶሜትድ ተሞክሮ ወደሚቀጥለው ደረጃ ይውሰዱት። የ አውቶሜት ፑልዝ የበለጸገ ውህደትን የሚደግፍ የጥልቀት መቆጣጠሪያ ሲሆን ባለሁለት መንገድ የግንኙነት ስርዓት በእውነተኛ ጊዜ ጥላ አቀማመጥ እና የባትሪ ደረጃ ሁኔታን ያቀርባል። የ አውቶሜትድ ፑልሴ PRO Hub የኤተርኔት ኬብል (CAT 5) እና ገመድ አልባ ግንኙነት (2.4GHz) ለቤት አውቶሜሽን ውህደት ይደግፋል ከሐውቡ ጀርባ ባለው ምቹ የ RJ45 ወደብ። እያንዳንዱ ማዕከል ውህደትን መደገፍ ይችላል።
እንደ መጀመር
In order to integrate your motorized window treatments with AMX, you will need to have:
- Downloaded the free Automate Shades app via the Apple App Store (available under iPhone /iPad apps) or the Google Play Store.
- Purchased one or more Automate Pulse PRO Hub units (dependent on the space’s square footage and obstructions) and additional repeaters (up to two additional repeaters supported per hub) if required.
- Integrated your motorized window treatments into the Automate Pulse app 2.
መመሪያዎች ተካትተዋል።
- Set up instructions for both the Automate Pulse app 2 & Automate Pulse PRO Hub.
- AMX Driver Installation Instructions
- AMX Driver Guide
- Integration Diagram
- Integration FAQ’s
AMX HUB DRIVER INSTALLATION SECTION
- Find Rollease Acmeda ARC2 module via the AMX 3rd Party Tech Center.
- ማህደሩን ይንቀሉ እና Rollease Acmeda ARC2 Demo v1_0.apwን ይክፈቱ file በኔትሊንክስ ስቱዲዮ ውስጥ ይህንን የውቅረት አማራጩን “በይነገጽ አይነት” ወደ “ዲመር”፣ “ሼድ” ወይም “ሁለቱም” በማቀናበር ማድረግ ይችላሉ።
- On line 54, replace the current IP address with the actual IP address of your hub.
- Comment out each of the “MOTORADD” commands (lines 118 – 122).
- የቀድሞውን ያሰባስቡ እና ይጫኑample program እና Duet ሞጁል ወደ የእርስዎ AMX ፕሮሰሰር።
- Using AMX TPDesign 4, load the exampየንክኪ ፓነል ወደ የእርስዎ AMX የንክኪ ፓነል።
- The module will automatically attempt to communicate with the hub when the program loads. Once communication is established with the hub, the Communicating indicator on the top right of the touch panel example በይነገጽ ያበራል። ከሆነ ወደሚቀጥሉት ደረጃዎች ይቀጥሉ. ካልሆነ በኔትሊንክስ ያስገቡት የአይ ፒ አድራሻ ትክክል መሆኑን እና ሃብ እና ኤኤምኤክስ ፕሮሰሰር በተመሳሳይ ኔትወርክ ላይ መሆናቸውን ያረጋግጡ።
- On the Command Processor tab on the touch panel, click the “Setup” button so it illuminates blue.
- Using a remote or the Rollease Acmeda app, move each shade to initiate a response (in order to identify each).
- The address of the last motor that moved/responded will automatically populate in the Motor Address field on the touchpanel. Move each motor to identify each address.
- Once you have the address for all your desired motors, uncomment the “MOTORADD” commands in the example program (lines 118 – 122) and enter in the appropriate address in the command for each motor (the exampመርሃግብሩ 5 ሞተሮች አሉት ። በመጫንዎ ላይ ብዙ ወይም ያነሰ ሊኖርዎት ይችላል). አድራሻዎቹ አንዴ ከገቡ በኋላ እንደገና ያሰባስቡ እና ፕሮግራምዎን እንደገና ይጫኑ።)
- እርዳታውን ይመልከቱ fileየሞጁሉን አቅም በተመለከተ ለተጨማሪ ዝርዝሮች እና መረጃ በሞጁል ፓኬጅ ውስጥ ተካትቷል።
Entering the wrong IP address in the “IP Address” configuration line. If you’re failing to discover devices double check this!
AMX SMART HOME CONTROL SYSTEM CONNECTION
ተዘውትረው የሚጠየቁ ጥያቄዎች
ጥ. ምንም Pulse PRO Hub አልተገኘም።
A. Make sure that your Automate Pulse PRO is connected to the correct network and get an IP Address available and still communicating with the network using the Automate Shades App.
ጥ. የጥላ ገደቦች በትክክል አልተዘጋጁም።
A. Calibrate shade limits with your Rollease Acmeda remote before setting the appropriate open and close time within AMX SYSTEM.
ጥ፡ ሼድ ጨርሶ አይንቀሳቀስም።
A. Make sure the selected Pulse Pro Hub is the correct Pulse PRO for the shade to be controlled. Confirm the correct bindings are set in the AMX System connections tab between the Pulse PRO and Shade drivers.
ጥ. ብዙ Pulse Hub's 2 አለኝ፣ ምን አደርጋለሁ?
A. Load two Automate Pulse PRO Hub drivers. After selecting “Retrieve Hubs” located in the driver actions tab, you will see different Automate Pulse Hubs 2 - select the desired one.
Q. I don’t see any shade bindings in the Pulse PRO driver?
ሀ. በአሽከርካሪ ድርጊቶች ትር ውስጥ የሚገኘውን "ጥላዎችን ሰርስሮ ማውጣት" የሚለውን ይምረጡ.
ጥ. የሚገኘውን አውቶሜትድ ፑልሴ ሃብ 2 እንዴት ነው የምቃኘው?
A. Once the Automate Pulse PRO Hub is properly connected via the Ethernet cable or Wireless network, navigate to the Automate Pulse PRO Hub Properties page within Composer. Select “Retrieve Hubs” located in the driver actions tab.
Q. We get unexpected responses from the CONTROL4 system, or “?” symbols
ሀ. የኤተርኔት ወደብ ወይም ዋይ ፋይ የሚጠቀሙ ሁሉም ግንኙነቶች በትክክል መስራታቸውን ያረጋግጡ። ያመለጠ ግንኙነት ያልተፈለገ ወይም ያልተጠበቀ ውጤት እንደሚያስገኝ ይታወቃል።
ድጋፍ ምንጮች
ለተጨማሪ እርዳታ ቸርቻሪዎን ያነጋግሩ፣ የእኛን ይጎብኙ webጣቢያ በ www.rolleaseacmeda.com
