coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

የአውታረ መረብ ውቅር

1. በምርቱ ላይ ኃይል
   • Align the opener to the slot
   • ለመክፈት የባትሪውን ሽፋን በተቃራኒ ሰዓት አቅጣጫ አሽከርክር
   • Remove the battery insulation film to power
2. ለ 3s የዳግም አስጀምር ቁልፍን ተጫን እና ይልቀቁ ፣ቀይ LED ለአውታረ መረብ ውቅር ብልጭ ድርግም ይላል።

የመጫኛ መመሪያዎች

የመጫኛ ቦታ
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

እባክዎ መመሪያውን በጥንቃቄ ያንብቡ እና ምርቱን በትክክል ይጠቀሙ
ስለገዙ እናመሰግናለንasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

የምርት መግለጫ

ጠቃሚ ምክሮች
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

የምርት መለኪያዎች

• Product Name Zigbee Ambient Light Sensor
• የገመድ አልባ ፕሮቶኮል ዚግቤ 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm