ይዘቶች መደበቅ
1 Elecrow ESP32 AI Camera Development Board Vision Sensor Board
2 የመሣሪያ ክፍሎች
3 ፈጣን መመሪያ
4 የአውታረ መረብ ማጣመር
5 ዋና ዝርዝሮች
6 ሰነዶች / መርጃዎች
6.1 ዋቢዎች

Elecrow-LOGO

Elecrow ESP32 AI Camera Development Board Vision Sensor Board

Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-PRODUCT

የመሣሪያ ክፍሎች

Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-1

  1. የድምፅ ማጉያ ራስጌ
  2. RGB ብርሃን
  3. አል አዝራር
  4. MIC
  5. UART ራስጌ
  6. TF ካርድ ማስገቢያ
  7. ካሜራ
  8. ረዳት ብርሃን
  9. ዳግም አስጀምር አዝራር
  10. ተናጋሪ
  11. ዓይነት-C ወደብ
  12. የኃይል ብርሃን
  13. የባትሪ ብርሃን
  14. BAT Header

ፈጣን መመሪያ

  • Al Button:
    • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
  • ዳግም ማስጀመር ቁልፍ፡-
    • Single-click to reboot after firmware flashing failure or device malfunction.
  • የኃይል ብርሃን
    • The red LED is on steadily when powered.
  • የባትሪ ብርሃን፡
    • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

የአውታረ መረብ ማጣመር

  1. Plug in the Type-C cable to power on.
  2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
  3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
    • ከሆነ webpage does not open automatically, please visit 192.168.4.1 in your browser.
  4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
    • You can see your Wifi in “WiFi Network”.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-2
    • ማስታወሻ፡- If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-3
  5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-4
  6. After the account is successfully created and logged in, you will receive a 5000-point reward.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-5
  7. Click the “Al Hub” button to start “Add Agent”.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-6
  8. Click “Add Agent” and give your Al Agent a name.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-7
  9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-8Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-9
  10. After completing “Add Device”, you can configure the character.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-10
  11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-11
    • ማስታወሻ፡- If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

ዋና ዝርዝሮች

  • የምርት ስም፡- Al Camera Module
  • ዋና መቆጣጠሪያ ESP32-S3R8
  • ማሳያ 1.83-inch TFT-LCD Touch Screen
  • ፒክስሎች 2 ሜፒ
  • ገመድ አልባ WiFi & Bluetooth 5.0
  • ብልጭታ 16 ሜባ
  • TF ካርድ ማስገቢያ እስከ 128GB ድረስ ይደግፋል
  • በይነገጽ UART Interface. IC Pad
  • ግቤት 5V/1A
  • መጠኖች 56.05*44.5*18.6ሚሜ
  • የአሠራር ሙቀት -20 ° ሴ እስከ 65 ° ሴ

ሰነዶች / መርጃዎች

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [pdf] የተጠቃሚ መመሪያ
ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

ዋቢዎች

አስተያየት ይስጡ

የኢሜል አድራሻዎ አይታተምም። አስፈላጊ መስኮች ምልክት ተደርጎባቸዋል *