FlySpark F4 V1 Stack Flight Controller
ዝርዝሮች
- የምርት ስም፡-
FlySpark F4 V1 BLS 60A ቁልል - የ AI ባህሪዎች
Sensor Fusion, PID Autotuning, Adaptive Filtering - የሶፍትዌር ድጋፍ:
Betaflight፣ INAV፣ Ardupilot፣ EMU-በረራ፣ ስካይ ብሩሽ - ESC Communication:
BLHeli_S ብሉቱዝ እና ዩኤስቢ-ሲ - ግንኙነት፡
3-6S LiPo - መጠን፡
47.8ሚሜ(ኤል) x 47.5ሚሜ(ወ) x 18.3ሚሜ(ኤች) - መጫን፡
30.5 x 30.5 ሚሜ ከ 4 ሚሜ ቀዳዳ መጠን ጋር - ክብደት፡
34 ግ
የምርት አጠቃቀም መመሪያዎች
FlySpark F4 V1 የበረራ መቆጣጠሪያ
አቀማመጥ፡-
Refer to the user manual for the layout of the flight controller.
የዳርቻ ግንኙነት፡-
Connect peripherals as per the provided diagram.
የመተግበሪያ እና FC ውቅረት፡-
Use the recommended apps and follow the configuration instructions.
የFC Firmware ዝመና፡-
Connect the flight controller to a PC via USB for firmware updates.
FLYSPARK BLS 60A 4-IN-1 ESC
አቀማመጥ፡-
Check the layout guide in the manual for proper installation.
ከሞተሮች እና የኃይል ገመድ ጋር ግንኙነት;
Connect motors and power cables securely.
የESC ውቅር፡
Use the FlySpark app for ESC configuration settings.
ESC Firmware ዝማኔ፡-
Follow the provided steps to update the firmware for ESC.
FlySpark F4 V1 BLS 60A ቁልል
ዝርዝሮች በላይview
ጥቅል
- FlySpark F4 V1 Flight Controller x 1
- FlySpark BLS 60A 4-in-1 ESC x 1
- 35V 1000uF ዝቅተኛ የESR Capacitor x 1
- M3 ናይሎን ነት x 4
- SH 1.0ሚሜ 25ሚሜ-ርዝመት 8ፒን ኬብል(ለFC-ESC ግንኙነት) x 1 SH 1.0ሚሜ 75ሚሜ-ርዝመት 6ፒን ኬብል* x 1
- M3*30ሚሜ ውስጣዊ ባለ ስድስት ጎን ብሎኖች x 4
- DJI 6pin ኬብል(80ሚሜ) x 1
- XT60 የኃይል ገመድ (100 ሚሜ) x 1
የ FC ግንኙነት ንድፍ
የFC እና ESC ግንኙነቶች መመሪያ
ዘዴ 1፡
- Using 8.Pin JST Cable
ዘዴ 2፡
ቀጥታ መሸጥ
- ከታች ያሉትን የፓድ ፍቺዎች በመከተል በእያንዳንዱ ጫፍ ላይ 8 ገመዶችን ወደ 8 ንጣፎች ይሸጡ
የበረራ መቆጣጠሪያ ዝርዝሮች
- ባለ 6-ሚስማር ገመድ ተጠቀም ከኦ3 አየር ክፍል ጋር አብሮ ይመጣል
- ባለ 6-ሚስማር ገመድ ተጠቀም ከFlySpark F4 V1 BLS 60A Stack ጋር ይመጣል
F C Firmware update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:
- Use a USB cable to connect the FlySpark F4 VI flight controller to your PC
Open Betaflight I INAV Configurator.
- . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an exampለ.
Navigate to Firmware Flashing:
- In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.
Select Target and Flash Firmware:
- Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
- Initiate the firmware flashing process.
ማስታወሻ፡-
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be performed using a USB connection to your PC.
Flyspark BLS 60A 4-in-l ESC
ከሞተርስ እና ከኃይል ገመድ ጋር ግንኙነት
ESC Specs FlySpark F4 V1 BLS 60A Stack
ESC Firmware ዝማኔ
ይህ 8-ቢት 50A ESC በBLHeliS firmware ቀድሞ የተጫነ ነው ነገር ግን ወደ ብሉጃይ ፈርምዌር ብልጭ ድርግም ማለት ይችላል፣ RPM ማጣሪያ እና Bi-directional Dshot ድጋፍ ይሰጣል። firmware ን ለማዘመን የሚከተሉትን ደረጃዎች ይከተሉ
- Prepare Your Drone:
Remove all propellers from your drone for safety. - Connect ESC to Flight Controller:
Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly. - ከፒሲ ጋር ይገናኙ፡
Use a USB Type-C cable to connect the flight controller to your computer. - Access Firmware Configuration:
Open the Chrome browser and visit: www.esc-configurator.com - Flashing Steps:
Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.
ማስጠንቀቂያዎች፡-
- PROPELLERS OFF: REMOVE ALL PROPELLERS.
- SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
- FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
- STABLE POWER: ENSURE STABLE POWER SUPPLY.
- www.FlySpark.in
የሚጠየቁ ጥያቄዎች
የ ESC firmwareን እንዴት ማዘመን እችላለሁ?
To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.
ሰነዶች / መርጃዎች
 |
FlySpark F4 V1 Stack Flight Controller [pdf] የተጠቃሚ መመሪያ F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller |