PDU እና የጥገና ማለፊያ መቀየሪያ ሞዱል
“
የምርት መረጃ
ዝርዝር መግለጫዎች፡-
- Model: Bypass Switch Module V. 2.0
- Usage: External power distribution unit for UPS systems or
ጥራዝtagሠ ተቆጣጣሪዎች - Mounting: Rack or Wall Mountable
- Input Power: Mains power cord
- Output Receptacles: Master for computer, Slave for
ተጓዳኝ እቃዎች - Functionality: Maintenance bypass, Power distribution, Power
በማስቀመጥ ላይ
የምርት አጠቃቀም መመሪያዎች
1. Installation and Operation Inspection:
Remove the unit from the shipping package and inspect for any
damage. Contact carrier if damage found.
2. Rack Mount/Wall Mount the Unit:
The module can be mounted to a 19″ enclosure or wall. Follow the
provided instructions for installation.
3. Connect to the Wall Outlet:
Plug the input power cord into the wall outlet. Power LED
indicates normal mains power.
4. Connect UPS:
Connect UPS input/output cords to the corresponding sockets on
ክፍሉ ።
5. Operation Transfer to Maintenance Bypass:
Ensure Power LED is lit, switch the bypass switch from Normal to
Bypass for utility power supply.
6. ተያያዥ መሳሪያዎች፡-
Connect devices to Master and Slave output receptacles based on
power consumption requirements.
7. Transfer to UPS Protection:
After maintenance, reconnect UPS to the unit and switch bypass
from Bypass to Normal for UPS protection.
8. Master/Slave Function Operation:
Enable/disable Master/Slave function switch based on load
requirements. Slave LED indicates load status.
ተዘውትረው የሚጠየቁ ጥያቄዎች (FAQ)
ጥ: ክፍሉ ኃይል እየተቀበለ መሆኑን እንዴት አውቃለሁ?
A: The Power LED will indicate normal mains power by lighting
ወደ ላይ
Q: Can I mount the unit on a wall?
A: Yes, the unit can be wall-mounted using the provided
መመሪያዎች.
Q: What is the purpose of the Master/Slave function?
A: The Master/Slave function helps in power saving by
controlling power to peripherals based on the main device
ሁኔታ.
""
PDU & Maintenance
2. ምርት አብቅቷልview
ማለፊያ መቀየሪያ ሞዱል
ፈጣን መመሪያ
V. 2.0
!Master output receptacle
(for connecting a computer)
$Slave output receptacles
(for connecting peripherals)
‘Socket to UPS output (Socket to UPS input
“Bypass switch #AC input %Circuit breaker &Master/Slave function switch
የኃይል LED
Slave On LED
1. መግቢያ ምርቱ እንደ ውጫዊ የኃይል ማከፋፈያ አሃድ ከ UPS ስርዓቶች ወይም ከትልቅ ቮልዩ ጋር በመተባበር ጥቅም ላይ ይውላል.tage regulators. It allows to manually transfer the connected equipment to utility power via a bypass switch, permitting scheduled maintenance or UPS replacement without power interruption. Combined power distribution feature and the master-controlled design, it provides maintenance bypass function and power saving within a rack mechanism.
Rack Mount/Wall Mount the Unit The module can be mounted to a 19” enclosure or wall. Please follow below chart for rack/wall mount installation.
ግድግዳ
3. Installation and Operation Inspection Remove the unit from the shipping package and inspect it for damage that may occur during transportation. Notify the carrier and place of purchase if any damage is found. The shipping package contains: ! Maintenance bypass switch module x 1 ! Quick guide x 1 ! Mains power cord x 1 ! Screws and mounting ears
Connect to the Wall Outlet Plug the input power cord of the unit to the wall outlet. The Power LED will light up when the mains is normal. The Power LED will be off while power failure.
Chart 1: Rack mounting
Chart 2: Wall mounting
UPSን ያገናኙ የኤሌክትሪክ ገመድ ከ UPS ግብዓት ወደ ዩኒት የ UPS ግብዓት ሶኬት ያገናኙ። የ UPS ውፅዓትን በክፍሉ ላይ ካለው የ UPS ውፅዓት ሶኬት ጋር ለማገናኘት አንድ የኤሌክትሪክ ገመድ ይጠቀሙ።
የመስመር ላይ UPS
4. Operation Transfer to Maintenance Bypass Before transferring to maintenance bypass, make sure the Power LED is lighting. Transfer the rotary bypass switch from “Normal” to “Bypass”. At this time, all connected devices are powered by the utility power directly. You may turn off the UPS and disconnect two cables connecting to UPS. Then you may now service the UPS.
16A/16A ወይም 16A/10A
Connect Equipment There are two types of output receptacles: Master, and Slave. To save power consumption, the unit is equipped with Master and Slave output receptacles. The Master output receptacle will sense if master device (computer) is on. If the master device is no longer drawing current, it will automatically shut down the power to the Slave output receptacles. Please refer to below charts for detailed equipment connection.
Plug computer into Master Output Receptacle
ኮምፒውተር
Transfer to UPS Protection After maintenance service is done, make sure the UPS operation is normal. Then, reconnect UPS to the unit by following Installation Section. Verify the Power LED is lighting. Then transfer the rotary bypass switch from “Bypass” to “Normal”. Now, all connected devices are protected by UPS.
Master/Slave Function Operation After connecting all devices to the unit, press “Master/Slave switch” to enable status ( ). The Slave On LED will light up when connecting load on master output is above 20W. Press “Master/Slave switch” to disable status ( ), the function is disabled and the Slave On LED will be on.
Status & Indicator Table Status
1. Utility is normal. 2. Utility fails but UPS is providing power. Utility fails Master/Slave function is enabled and the connecting load on master output is above 20W. Master/Slave function is enabled and the connecting load on master output is below 20W. Master/Slave function is disabled.
Indicator Power LED (Green) on Power LED (Green) off Slave On LED (Yellow) on
Slave On LED (Yellow) off Slave on LED (Yellow) on
Plug peripherals into Slave Output Receptacle
ተቆጣጣሪ አታሚ
Switch NOTE: When the computer is turned off, the Master output receptacle shuts off power to the slave output receptacles. However, when the computer goes into “sleep mode” or the power consumption of connected device to Master output receptacle is below 20 W, the Master output receptacle may not properly recognize the reduced power level.
5. ጠቃሚ የደህንነት ማስጠንቀቂያ (እነዚህን መመሪያዎች አስቀምጥ) ይህንን ክፍል በአስተማማኝ ሁኔታ ለመስራት፣ እባክዎ ሁሉንም መመሪያዎች በጥንቃቄ ያንብቡ እና ይከተሉ። ለመንቀል፣ ለመጫን ወይም ለመስራት ከመሞከርዎ በፊት ይህንን መመሪያ በደንብ ያንብቡ። ለተጨማሪ ማጣቀሻ ይህንን ፈጣን መመሪያ ማቆየት ይችላሉ። ጥንቃቄ፡ ምርቱ በቤት ውስጥ ብቻ ጥቅም ላይ መዋል አለበት. ይጠንቀቁ፡ ክፍሉን በፈሳሽ አጠገብ ወይም ከመጠን በላይ በሆነ መamp አካባቢ. ይጠንቀቁ: ምርቱን በቀጥታ በፀሐይ ውስጥ ወይም ሙቅ በሆነ ምንጭ አጠገብ አያስቀምጡ. ጥንቃቄ: ፈሳሽ ወይም የውጭ ነገሮች ወደ ምርቱ ውስጥ እንዳይገቡ ያድርጉ. ይጠንቀቁ፡ ምርቱን 2P + የመሬት ሶኬቶችን በመጠቀም መሬት ላይ ያድርጉት። ይጠንቀቁ፡ ምርቱን በሚጭኑበት ጊዜ የምርቱን ፍሰት ፍሰት እና የሚያቀርቧቸው መሳሪያዎች ድምር ከ3.5mA መብለጥ እንደሌለበት ያረጋግጡ።
ሰነዶች / መርጃዎች
 |
FSP PDU and Maintenance Bypass Switch Module [pdf] የተጠቃሚ መመሪያ PDU and Maintenance Bypass Switch Module, Maintenance Bypass Switch Module, Bypass Switch Module, Switch Module, Module |