ይዘቶች መደበቅ
1 ኤል ኤስ ኤሌክትሪክ ድራይቭView9 የመሣሪያ ዳታቤዝ
2 የምርት መረጃ
3 Applicable products of Driveview9
4 Communication type(protocol)
5 How to connect DriveView9
6 Convertor cable
7 መንዳትView9 የተጠቃሚ መመሪያ
8 የሚጠየቁ ጥያቄዎች
9 ሰነዶች / መርጃዎች
9.1 ዋቢዎች

LS-ኤሌክትሪክ-ሎጎ

ኤል ኤስ ኤሌክትሪክ ድራይቭView9 የመሣሪያ ዳታቤዝ

LS-ELECTRIC-DriveView9-Device-Database-PRODUCT

ዝርዝሮች

  • የሚደገፉ ምርቶች መንዳትView9
  • የግንኙነት ፕሮቶኮሎች፡- Modbus-TCP, Modbus-RTU, LS485
  • የግንኙነት ዘዴዎች- RS485, USB-RS485, USB-RJ45

የምርት መረጃ

መንዳትView9 is a software designed to communicate with specific models of inverters. It supports various communication protocols such as Modbus-TCP, Modbus-RTU, and LS485. Different connection methods are required based on the model of the inverter.

የአጠቃቀም መመሪያዎች

የተኳኋኝነት ማረጋገጫ
Driveን ከማገናኘትዎ በፊትView9, ensure that your inverter model is compatible with the software. Refer to the compatibility table provided in the user manual to verify compatibility.

የግንኙነት አይነት

መንዳትView9 ሶስት የመገናኛ ዘዴዎችን ይደግፋል.

  • Modbus-TCP: የኢንዱስትሪ ኢተርኔት ፕሮቶኮል
  • Modbus-RTU፡ የመሣሪያ ቁጥጥር መደበኛ ፕሮቶኮል
  • LS485፡ ለ LSELECTRIC ምርቶች የተወሰነ ፕሮቶኮል

የግንኙነት ማዋቀር

Driveን ለማገናኘትView9:

  1. ከ M100 በስተቀር ሁሉም ሞዴሎች በ RS485 ሊገናኙ ይችላሉ.
  2. iV5 ​​የግንኙነት አማራጭ ይፈልጋል (LS485/Modbus-RTU)።
  3. For specific models like iS7, H100, S100, use USB-RJ45 cable for connection.

Convertor Cable
Refer to the provided convertor cables for connecting different models of inverters to DriveView9.

Applicable products of Driveview9

  • መንዳትView7 ከDrive በፊት ጥቅም ላይ የዋለ ሶፍትዌር ነው።View9. መንዳትview7 የሚደገፈው በቆዩ ኢንቮርተሮች ብቻ ነው። ምንም እንኳን የሚደገፍ ሞዴል ቢሆንም, በስርዓተ ክወናው ዝቅተኛ ስሪት ውስጥ ብቻ ይገኛል, ስለዚህ ይጠንቀቁ.
  • If DriveView9 እና ኢንቮርተር እርስበርስ መገናኘት አይችሉም፣የኢንቮርተሩ የስርዓተ ክወና ስሪት ከDrive ጋር ተኳሃኝ መሆኑን ለማየት ከታች ያለውን ሰንጠረዥ ይመልከቱ።View9፣ እና Driveን ይጠቀሙView Inverter OSን የሚደግፍ።

LS-ELECTRIC-DriveView9-Device-Database-FIG- (1)

Communication type(protocol)

  • መንዳትView9 supports three communication methods (Modbus-TCP, Modbus-RTU, LS485).
  • Modbus-TCP፡ Industrial Ethernet Protocol Developed for Wide Area Network (WAN)
  • Modbus-RTU : A standard protocol that is simple but can perform the functions necessary for equipment control and monitoring, and is released free of charge and widely used as a standard protocol.
  • LS-485 : A dedicated protocol used only among LSELECTRIC products.

LS-ELECTRIC-DriveView9-Device-Database-FIG- (2)

How to connect DriveView9

  1. All models except M100 can be connected by RS485. iV5 requires communication option (LS485/Modbus-RTU) The USB-RS485 uses a two-way signal converter. Connect the USB to the computer and wire the 485 line (+), (-) to the S+,S- on the inverter terminal.LS-ELECTRIC-DriveView9-Device-Database-FIG- (3)
  2. iS7፣ H100፣ S100
    • Use the USB-RJ45 (USB to RS232 + RS232 to RJ45) cable. Connect the USB to the computer and the RJ45 to the keypad port.
    • See “Creating a Cable to Connect to the RJ45 Port and RS232” on the back page.

LS-ELECTRIC-DriveView9-Device-Database-FIG- (4)

Convertor cable

LS-ELECTRIC-DriveView9-Device-Database-FIG- (5)

[ማስታወሻ] የ RJ45 ወደብ ከRS232 ጋር የሚያገናኝ ገመድ መፍጠር (ለአይኤስ7፣ ኤች100፣ ኤስ100)

LS-ELECTRIC-DriveView9-Device-Database-FIG- (6)

  • After making the cable as shown below, connect it to the KPD of the inverter controller and the 232 terminal of the PC.

LS-ELECTRIC-DriveView9-Device-Database-FIG- (7)

መንዳትView9 የተጠቃሚ መመሪያ

  • Run DriveView9 installed on your computer.
  • If driveview9 በኮምፒተርዎ ላይ አልተጫነም, "Drive" ን ያውርዱView9' መጫኛ file ከ LSELECTRIC webጣቢያ (www.lselectric.co.kr) እና በፒሲዎ ላይ ይጫኑት.
    When DriveView9 ሩጫዎች፣ በላይኛው ግራ ጥግ ላይ [አዲስ]ን ጠቅ ያድርጉ ወይም File > በምናሌው ውስጥ አዲስ ፕሮጀክት።

LS-ELECTRIC-DriveView9-Device-Database-FIG- (8)

LS-ELECTRIC-DriveView9-Device-Database-FIG- (9)

የፕሮጀክት ስም እና ኢንቮርተር ሞዴል ይፍጠሩ እና ፕሮጀክቱን ለማከማቸት ማውጫ ያዘጋጁ fileኤስ. እንዲሁም ለመገናኘት የምርት ሞዴሉን እና ኢንቮርተር ሥሪቱን ይምረጡ እና እሺን ይጫኑ። *ለአይኤስ7፣ ስሪት 1.00 መደበኛ (መጠን) ስሪት ነው።

LS-ELECTRIC-DriveView9-Device-Database-FIG- (10)

Click Settings > Modbus-RTU > Modbus-RTU right-hand Settings > Check COM-01 Int485 St Number 1 Auto scanning port > Scan > OK > Connect

LS-ELECTRIC-DriveView9-Device-Database-FIG- (11)

  • Communication speed can be set at COM-03, initial value is 9600bps
  • ከተጠቀሙLS-ELECTRIC-DriveView9-Device-Database-FIG- (12) ይህ ገመድ፣ እባክዎን Baudrate 19200bps ያዘጋጁ

Click Tools > Options

  1. መንዳትView9 is language-enabled. The languages are English and Korean in two ways.
  2. You can also select a theme color. The colors are Blue, Dark, and White.

LS-ELECTRIC-DriveView9-Device-Database-FIG- (13)

Click ‘Parameter’ to read parameters from Drive.
Check the parameter items you want to read.

LS-ELECTRIC-DriveView9-Device-Database-FIG- (14)

የሚጠየቁ ጥያቄዎች

ጥ: እንዴት ድራይቭን መጫን እችላለሁ?View9 በኮምፒውተሬ ላይ?
A: To install DriveView9, መጫኑን ያውርዱ file ከ LSELECTRIC webጣቢያ እና በተጠቃሚ መመሪያ ውስጥ የተሰጡትን የመጫኛ መመሪያዎችን ይከተሉ።

ጥ: Drive ከሆነ ምን ማድረግ አለብኝ?View9 እና የእኔ ኢንቮርተር መገናኘት አይችሉም?
A: Check the compatibility table for DriveView9 and ensure that the OS version of your inverter is supported. Use the appropriate DriveView የእርስዎን ኢንቮርተር ኦኤስ የሚደግፍ ስሪት።

ሰነዶች / መርጃዎች

ኤል ኤስ ኤሌክትሪክ ድራይቭView9 የመሣሪያ ዳታቤዝ [pdf] የተጠቃሚ መመሪያ
iP5A፣ Drive iH፣ iE5፣ iC5፣ iG5A፣ iS5፣ iV5፣ iV5L፣ iS7፣ C100፣ M100፣ G100፣ S100፣ H100፣ DriveView9 የመሣሪያ ዳታቤዝ፣ የመሣሪያ ዳታቤዝ፣ DriveView9

ዋቢዎች

አስተያየት ይስጡ

የኢሜል አድራሻዎ አይታተምም። አስፈላጊ መስኮች ምልክት ተደርጎባቸዋል *