NVIDIA TX2 Jetson Developer Kit
ማስታወሻ
እንኳን ወደ NVIDIA Jetson መድረክ በደህና መጡ! ወዲያውኑ ማድረግ ያለብዎት ሁለት ቁልፍ ነገሮች አሉ-
- Sign up for the NVIDIA Developer Program – this enables you to ask questions and contribute on the NVIDIA Jetson Forums, gives access to all documentation and collateral on the Jetson Download Center, and more.
- Read this User Guide! After that, check out these important links:
- Jetson FAQ – Please read the FAQ.
- Support Resources – This web የጄትሰን ፎረም እና የጄትሰን ሥነ-ምህዳር ገጽን ጨምሮ ጠቃሚ ከሆኑ ግብዓቶች ጋር ገጽ ይገናኛል።
- L4T Release Notes – L4T is a key component of the Jetson platform, and provides the sample filesystem for your developer kit. Please read the latest release notes.
አመሰግናለሁ
The NVIDIA Jetson team
JETSON TX2 DEVELOPER KIT
The NVIDIA® Jetson™ TX2 Developer Kit gives you a fast, easy way to develop software and hardware for the Jetson TX2 AI supercomputer on a module. Jetson TX2 is ideal for applications requiring high computational performance in a low power envelope.
NVIDIA JetPack™ SDK supports both your developer kit and host development platform. It includes:
- Sample Linux filesystem with NVIDIA drivers
- AI and Computer Vision libraries and APIs
- Developer tools
- Documentation and sample ኮድ
Before using your developer kit, you must install JetPack. A Linux host computer is required; for details, see How to Install JetPack, below.
Minimum system requirements for the host computer are:
- Ubuntu Linux x64 v16.04 or v18.04
- A valid Internet connection
- At least 23GB of disk space
በሳጥኑ ውስጥ ተካትቷል
The Jetson TX2 Developer Kit includes:
- Jetson TX2 module (P3310) with thermal solution
- Reference carrier board (P2597)
- Power supply with AC cord
- USB Micro-B to USB A cable
- USB Micro-B to Female USB A cable
- (2x) WLAN/Bluetooth antenna
የገንቢ ኪት በይነገጽ
ከፍተኛ view of developer kit carrier board (revisions B02 and B04)
ከፍተኛ view of developer kit carrier board (revision C02)
Note about carrier board revisions
The B02 and B04 revision carrier boards are extremely similar. B04 added the CR5 and CR6 LEDs and some minor circuit changes. The C02 revision included changes in support of Jetson TX2i and Jetson TX2 4GB modules, consolidation of button header pins into a single pin header, and changing the SATA connector to a right angle type to avoid possible conflict with a PCIe card. See the Jetson TX2 Developer Kit Carrier Board Specification for comprehensive information.
የበይነገጽ ዝርዝሮች
This list highlights some of the Jetson TX2 Developer Kit carrier board interfaces.
- [CR1] Green LED indicates when SoC is enabled.
- [CR2] Green LED indicates when carrier board is powered.
- [CR3] Green LED indicates when [J18] M.2 Key E connector pin 6 is active.
- [CR4] Green LED indicates when [J18] M.2 Key E connector pin 16 is active.
- [CR5] Red LED indicates when main power supply is connected and active.
- [CR6] Red LED Indicates when the 12V supply for PCIe/SATA is active.
- [J1] SATA connector includes both data and power.
- [J2] PCIe x4 connector routes to a x4 PCIe 2.0 controller.
- [J4] The Power LED header can connect to a remote power LED.
- [J5] 10/100/1000 BASE-T Ethernet.
- [J12] Full-size SD Card interface supports up to SDR104 card mode (UHS-1).
- [J13] 400-pin (8 x 50) connector for the Jetson module. The Jetson TX2 Developer Kit carrier board supports these Jetson modules: Jetson TX2, Jetson TX2i, Jetson TX2 4GB, and Jetson TX1. See the L4T Development Guide for details about software support for those modules.
- [J15] 4-pin fan header for 5V PWM fan. The Jetson TX2 module included with the developer kit already has thermal solution attached including Delta Electronics AFB0405MA-AFGE)
- [J16] HDMI 2.0.
- [J18] M.2 Key E connector can be used for wireless networking cards, and includes interfaces for PCIe (x1), USB 2.0, UART, I2S & I2C.
- [J19] USB 3.0 Type A.
- [J20 B02/B04 or J28 C02] USB 2.0 Micro-AB connector.
- This connector can be used to flash the developer kit, and provides access to USB Device Mode features when the developer kit is running.
- [J21] 40-pin expansion header includes:
- Power pins.
Two 3.3V power pins and two 5V power pins. These are not switchable; power is always available when the developer kit is connected to power. - የበይነገጽ ሲግናል ካስማዎች.
By default, all interface signal pins are 3.3V, but some can be configured for 1.8V. See [J24] information below.
L4T provides a Python library, Jetson.GPIO, for controlling GPIOs. The library has the same API as RPi.GPIO. See /opt/nvidia/jetson-gpio/doc/README.txt on your Jetson system for details.
By default, all interface signal pins are configured as GPIOs, except pins 3 and 5 and pins 27 and 28, which are I2C SDA and SCL, and pins 8 and 10, which are UART TX and RX.
- Power pins.
| አማራጭ | ነባሪ | የምልክት ጥራዝtage | ፒን | የምልክት ጥራዝtage | ነባሪ | አማራጭ | |
| 3.3 ቪ አቅርቦት | 1 | 2 | 5.0 ቪ አቅርቦት | ||||
| I2C1 SDA | 3.3 ቪ | 3 | 4 | 5.0 ቪ አቅርቦት | |||
| I2C1 ኤስ.ኤል.ኤል | 3.3 ቪ | 5 | 6 | መሬት | |||
| Audio I2SMCLK | GPIO | 3.3Vor 1.8V | 7 | 8 | 3.3 ቪ | UART TXD | GPIO |
| መሬት | 9 | 10 | 3.3 ቪ | UART RXD | GPIO | ||
| UART RTS | GPIO | 3.3 ቪ | 11 | 12 | 3.3Vor 1.8V | GPIO | Audio I2S CLK |
| GPIO | 3.3Vor 1.8V | 13 | 14 | መሬት | |||
| GPIO | 3.3 ቪ | 15 | 16 | 3.3Vor 1.8V | GPIO | Digital Mic Input | |
| 3.3 ቪ አቅርቦት | 17 | 18 | 3.3Vor 1.8V | GPIO | |||
| SPI1 MOSI | GPIO | 3.3Vor 1.8V | 19 | 20 | መሬት | ||
| SPI1 MISO | GPIO | 3.3Vor 1.8V | 21 | 22 | 3.3 ቪ | GPIO | |
| SPI1 SCLK | GPIO | 3.3Vor 1.8V | 23 | 24 | 3.3Vor 1.8V | GPIO | SPI1 CS0 |
| መሬት | 25 | 26 | ጥቅም ላይ አልዋለም | ||||
| I2C0 SDA | 3.3 ቪ | 27 | 28 | 3.3 ቪ | I2C0 ኤስ.ኤል.ኤል | ||
| GPIO | 3.3Vor 1.8V | 29 | 30 | መሬት | |||
| GPIO | 3.3 ቪ | 31 | 32 | 3.3Vor 1.8V | GPIO | Digital Mic Clock | |
| GPIO | 3.3Vor 1.8V | 33 | 34 | መሬት | |||
| አማራጭ | ነባሪ | የምልክት ጥራዝtage | ፒን | የምልክት ጥራዝtage | ነባሪ | አማራጭ | |
| Audio I2SLRCK | GPIO | 3.3Vor 1.8V | 35 | 36 | 3.3 ቪ | GPIO | UART CTS |
| GPIO | 3.3 ቪ | 37 | 38 | 3.3Vor 1.8V | GPIO | Audio I2S DIN | |
| መሬት | 39 | 40 | 3.3Vor 1.8V | GPIO | Audio I2S DOUT | ||
- [J22] The camera connector supports up to six directly connected cameras via CSI-2, or up to 12 cameras via the virtual channel feature of CSI-2. The connector also includes some interface options for audio (I2S & DMIC).
- [J24] The voltage select header enables either 3.3V or 1.8V for these [J21] 40-pin expansion header pins:
Pins 7, 12, 13, 16, 18, 19, 21, 23, 24, 29, 32, 33, 35, 38, and 40
The 3.3V level is selected when a jumper is on [J24] pins 1-2. The 1.8V level is selected when a jumper is on [J24] pins 2-3. - [J25] Use the included developer kit power supply with this DC power jack.
- [J26] 30-pin expansion header includes:
- Power pins.
One 1.8V power pin, one 3.3V power pin, and one 5V power pin. These are not switchable; power is always available when the developer kit is connected to power. - የበይነገጽ ሲግናል ካስማዎች.
- Power pins.
| አማራጭ | ነባሪ | የምልክት ጥራዝtage | ፒን | የምልክት ጥራዝtage | ነባሪ | አማራጭ | |
| GPIO | 3.3 ቪ | 1 | 2 | 3.3 ቪ አቅርቦት | |||
| ጥቅም ላይ አልዋለም | 3 | 4 | 1.8VSupply | ||||
| CAN0 RX | 3.3 ቪ | 5 | 6 | – | GPIO | ||
| CAN0 TX | 3.3 ቪ | 7 | 8 | 5.0 ቪ አቅርቦት | |||
| GPIO | 3.3 ቪ | 9 | 10 | መሬት | |||
| መሬት | 11 | 12 | 1.8 ቪ | I2C2 CLK | GPIO | ||
| GPIO | 3.3 ቪ | 13 | 14 | 1.8 ቪ | I2C2 SDA | GPIO | |
| CAN1 RX | 3.3 ቪ | 15 | 16 | WDT RESET OUT | GPIO | ||
| CAN1 TX | 3.3 ቪ | 17 | 18 | 1.8 ቪ | I2C3 CLK | ||
| GPIO | 3.3 ቪ | 19 | 20 | 1.8 ቪ | I2C3 DAT | ||
| አማራጭ | ነባሪ | የምልክት ጥራዝtage | ፒን | የምልክት ጥራዝtage | ነባሪ | አማራጭ | |
| መሬት | 21 | 22 | 1.8 ቪ | GPIO | |||
| I2S1 CLK | 1.8 ቪ | 23 | 24 | 1.8 ቪ | I2S1 SDOUT | ||
| I2S1 SDIN | 1.8 ቪ | 25 | 26 | 1.8 ቪ | I2S1 LRCLK | ||
| SPDIF OUT or GPIO | DSPK OUT CLK | 1.8 ቪ | 27 | 28 | መሬት | ||
| SPDIF IN or GPIO | DSPK OUT DAT | 1.8 ቪ | 29 | 30 | ጥቅም ላይ አልዋለም | ||
JETPACK
NVIDIA JetPack SDK AI መተግበሪያዎችን ለመገንባት በጣም አጠቃላይ መፍትሄ ነው። ለጄትሰን ምርቶች የቅርብ ጊዜዎቹን የስርዓተ ክወና ምስሎች፣ ከቤተ-መጻህፍት እና ኤፒአይዎች ጋር ያካትታል፣ samples፣ የገንቢ መሳሪያዎች እና ሰነዶች።
የጄትፓክ አካላት ማጠቃለያ
This section briefly describes each component of JetPack. For additional details about these components, see the online documentation for JetPack at: https://docs.nvidia.com/jetson/jetpack/index.html
የስርዓተ ክወና ምስል
JetPack includes a sample file ስርዓት ከኡቡንቱ የተወሰደ።
ቤተ-መጽሐፍት እና ኤፒአይዎች
የጄትፓክ ቤተ-መጻሕፍት እና ኤፒአይዎች የሚከተሉትን ያካትታሉ፡-
- TensorRT እና cuDNN ከፍተኛ አፈጻጸም ላላቸው ጥልቅ ትምህርት መተግበሪያዎች
- CUDA for GPU-accelerated applications across multiple domains
- NVIDIA Container Runtime for containerized GPU-accelerated applications
- የመልቲሚዲያ ኤፒአይ ጥቅል ለካሜራ አፕሊኬሽኖች እና ዳሳሽ ነጂ እድገት
- VisionWorks and OpenCV for visual computing applications
Sample መተግበሪያዎች
JetPack በርካታ ዎች ያካትታልamples that demonstrate the use of JetPack components. The examples are stored in the reference fileስርዓት እና በገንቢ ኪት ላይ ሊጠናቀር ይችላል.
| JetPack አካል | Sample locations on the reference fileስርዓት |
| Tensor RT | /usr/src/tensort/sampሌስ/ |
| cu ዲኤንኤን | /usr /src/ cudnn_ sampያነሰ_ / |
| CUDA | /usr/አካባቢ/ኩዳ- / ሰampሌስ/ |
| መልቲሚዲያ ኤፒአይ | /usr/src/tegra_multimedia_api/ |
|
Vision Works |
/usr/share/vision works/sources/sampሌስ/ /usr/share/vision works-tracking/sources/sampሌስ/ /usr/share/vision works-sfm/sources/sampሌስ/ |
| ክፍት ሲቪ | /usr/share/OpenCV/sampሌስ/ |
የገንቢ መሳሪያዎች
JetPack የሚከተሉትን የገንቢ መሳሪያዎች ያካትታል። አንዳንዶቹ በቀጥታ በጄትሰን ሲስተም ጥቅም ላይ ይውላሉ፣ ሌሎች ደግሞ ከጄትሰን ሲስተም ጋር በተገናኘ በሊኑክስ አስተናጋጅ ኮምፒዩተር ላይ ይሰራሉ።
- የመተግበሪያ ልማት እና ማረም መሳሪያዎች፡-
- Nsight Eclipse Edition for development of GPU accelerated applications: Runs on the Linux host computer. Supports all Jetson products.
- CUDA-GDB ለመተግበሪያ ማረም፡ በጄትሰን ሲስተም ወይም በሊኑክስ አስተናጋጅ ኮምፒውተር ላይ ይሰራል። ሁሉንም የጄትሰን ምርቶችን ይደግፋል።
- የመተግበሪያ ማህደረ ትውስታ ስህተቶችን ለማረም CUDA-MEMCHECK፡ በጄትሰን ሲስተም ይሰራል። ሁሉንም የጄትሰን ምርቶችን ይደግፋል።
- የመተግበሪያ መገለጫ እና ማሻሻያ መሳሪያዎች፡-
- Nsight Systems for application profiling across GPU and CPU: Runs on the Linux host computer. Supports all Jetson products.
- nvprof for application profiling across GPU and CPU: Runs on the Jetson system. Supports all Jetson products.
- ቪዥዋል ፕሮfiler for application profiling across GPU and CPU: Runs on the Linux host computer. Supports all Jetson products.
- Nsight Graphics for graphics application debugging and profiling: Runs on the Linux host computer. Supports all Jetson products.
ሰነድ
JetPackን ከሚጠቀሙ ገንቢዎች ጋር ተዛማጅነት ያላቸው ሰነዶች የሚከተሉትን ያካትታሉ:
- JetPack ሰነድ
- L4T Development Guide
- L4T Release Notes
- TensorRT ሰነድ
- የcuDNN ሰነድ
- CUDA መሣሪያ ስብስብ
- የኒቪዲ ኮንቴይነር አሂድ ጊዜ
- VisionWorks Documentation
- የ Nsight Eclipse እትም ሰነድ
- CUDA-GDB ሰነድ
- CUDA-MEMCHECK ሰነድ
- የእይታ ስርዓቶች
- nvprof
- ቪዥዋል ፕሮfiler
- Multimedia API Reference
- ክፍት ሲቪ ሰነድ
- የእይታ ግራፊክስ
ጄትፓክ እንዴት እንደሚጫን
Installing JetPack to your developer kit requires you to perform these steps, detailed in the sections below:
- Download and install NVIDIA SDK Manager on the Linux host computer.
- Connect your developer kit to the Linux host computer.
- Put your developer kit into Force Recovery Mode.
- Use SDK Manager to select and install desired components.
- Download SDK Manager on the Linux Host Computer
You must have a Linux host computer to run SDK Manager and flash the developer kit. Supported host operating systems are: - Ubuntu Linux x64 Version 18.04 or 16.04
- የNVDIA SDK አስተዳዳሪን ለማውረድ እና ለመጫን እነዚህን መመሪያዎች ይከተሉ።
ማስታወሻ፡-
SDK Manager can flash and install software on a target Jetson device, but it cannot run directly on that device. Whether or not a Jetson device is present, you can use SDK Manager to update software on the Linux host.
Connect Developer Kit to the Linux Host Computer
Prepare your Jetson TX2 Developer Kit for initial setup as follows. For “headless” setup, skip the first two steps.
- Connect an external HDMI display to the carrier board’s HDMI port.
- Connect a USB keyboard and mouse to a USB hub (not included) and connect the hub to the developer kit’s USB Type-A port. (The USB Micro AB port will be needed for flashing.)
- Insert the Micro-B end of the included USB Micro-B to USB A cable to the carrier board’s USB Micro-AB port. Connect the other end to your Linux host computer.
- Connect the included AC adapter to the carrier board’s power jack. Plug the AC adapter into an appropriately rated electrical outlet.
- Use only the supplied AC adapter, as it is appropriately rated for your device.
Put Developer Kit into Force Recovery Mode
The developer kit must be in Force Recovery mode (RCM) to enable the installer to transfer system software to the Jetson module.
- Connect the developer kit as described above. It must be powered off.
- Press and hold down the Force Recovery button.
- Press and hold down the Power button.
- Release the Power button, then release the Force Recovery button.
Run SDK Manager
NVIDIA SDK Manager enables installation of software to the Jetson module and/or your Linux host computer.
For full instructions, see the SDK Manager documentation.
ማስታወሻ:
After the Jetson is flashed with the OS, it reboots and prompts you for initial configuration information like keyboard layout, username and password, etc.
If no display is attached to the developer kit during this first boot, the initial configuration will be “headless.” That is, you must communicate with the developer kit through a serial application on the Linux host computer (e.g., puTTY) connected via a host serial port to the correct local serial device.
WORKING WITH L4T
- NVIDIA L4T (the operating system component of Jet Pack) provides the Linux kernel, Bootloader, board support package (BSP), and sample filesystem for Jetson developer kits. SDK Manager can install L4T along with all the other Jet Pack components to get your developer kit up and running quickly.
- L4T is also available for download directly from the main L4T page on the Jetson Developer Site. See the “Quick Start Guide” section of the L4T Development Guide for flashing instructions.
- See also the Platform Adaptation and Bring-Up Guide, which describes how to port the L4T BSP and Bootloader from your developer kit to a new hardware platform incorporating the Jetson module. Porting L4T to a new device enables use of the other JetPack components on that device, along with the software you’ve created using the developer kit.
ተገዢነት
The NVIDIA Jetson TX2 Developer Kit is compliant with the regulations listed in this section. Compliance marks, including the FCC and IC ID numbers, can be found at: https://developer.nvidia.com/embedded/support
ዩናይትድ ስቴተት
የፌዴራል ኮሙዩኒኬሽንስ ኮሚሽን (ኤፍ.ሲ.ሲ.)
የ FCC ማስጠንቀቂያ
FCC መታወቂያ VOB-P3310
ይህ መሳሪያ የFCC ደንቦችን ክፍል 15 ያከብራል። ክዋኔው በሚከተሉት ሁለት ሁኔታዎች ተገዢ ነው.
- ይህ መሳሪያ ጎጂ ጣልቃገብነትን ላያመጣ ይችላል እና
- This device must accept any interference received, including any interference that may cause undesired operation of the device.
በFCC ሕጎች ክፍል 15 መሠረት ይህ መሣሪያ ለክፍል B ዲጂታል መሣሪያ ተሞክሮ እና ገደቡን የሚያከብር ሆኖ ተገኝቷል። እነዚህ ወሰኖች የተነደፉት በመኖሪያ ተከላ ውስጥ ካለው ጎጂ ጣልቃገብነት ምክንያታዊ ጥበቃን ለመስጠት ነው። ይህ መሳሪያ የሬድዮ ፍሪኩዌንሲ ሃይልን ያመነጫል፣ ይጠቀማል እና ሊያሰራጭ ይችላል፣ እና ካልተጫነ እና በመመሪያው መሰረት ጥቅም ላይ ካልዋለ በሬዲዮ ግንኙነቶች ላይ ጎጂ ጣልቃገብነት ያስከትላል። ነገር ግን, በአንድ የተወሰነ መጫኛ ውስጥ ጣልቃ ገብነት እንደማይፈጠር ምንም ዋስትና የለም.
ይህ መሳሪያ በሬዲዮ ወይም በቴሌቭዥን መቀበያ ላይ ጎጂ የሆነ ጣልቃገብነት የሚያስከትል ከሆነ መሳሪያውን በማጥፋት እና በማብራት ሊታወቅ የሚችል ከሆነ ተጠቃሚው ከሚከተሉት እርምጃዎች በአንዱ ወይም ከዚያ በላይ በሆነ መልኩ ጣልቃ ገብነትን ለማስተካከል እንዲሞክር ይበረታታል።
- የመቀበያ አንቴናውን አቅጣጫ ቀይር ወይም ወደ ሌላ ቦታ ቀይር።
- በመሳሪያው እና በተቀባዩ መካከል ያለውን ልዩነት ይጨምሩ.
- መሳሪያውን ተቀባዩ ከተገናኘበት በተለየ ወረዳ ላይ ወደ መውጫው ያገናኙ.
- ለእርዳታ ሻጩን ወይም ልምድ ያለው የሬዲዮ/ቲቪ ቴክኒሻን አማክር።
የFCC ማስጠንቀቂያ፡- በዚህ መሳሪያ ላይ በአምራቹ በግልፅ ያልፀደቁ ማንኛቸውም ለውጦች ወይም ማሻሻያዎች የተጠቃሚውን መሳሪያ የማንቀሳቀስ ስልጣን ሊሽሩ እንደሚችሉ FCC ማሳወቂያን ይፈልጋል።
የ RF የጨረር መጋለጥ መግለጫ
- This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
- Only those antennas with same type and lesser/equal gain filed በዚህ የFCC መታወቂያ ቁጥር ከዚህ መሳሪያ ጋር መጠቀም ይቻላል።
የበታች ጸሐፊዎች ላቦራቶሪዎች (UL)
UL Listed Product Logo for Jetson TX2 Developer Kit, model name P2597.
I.T.E E204896
UL Recognized Component Logo for Embedded System Module, model name P3310.
ካናዳ
ኢንዱስትሪ ካናዳ (አይሲ)
የአውሮፓ ህብረት
IC: 7361A-P3310
የ RF የጨረር መጋለጥ መግለጫ፡-
Jetson Dev Kit has been tested and complies with IC RSS 102 RF radiation exposure limits set forth for an uncontrolled environment when used with the NVIDIA accessories supplied or designated for this product. To satisfy IC exposure requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and persons during device operation. The use of any other accessories may not ensure compliance with IC RSS 102RF exposure guidelines.
This device bears the CE mark in accordance with Directive 2014/53/EU. This device complies with the following directives:
- የሬዲዮ መሳሪያዎች መመሪያ 2014/53/EU
- RoHS Directive 2011.65.EU
የአውሮፓ ህብረት የተስማሚነት መግለጫ ሙሉ ቃል በ፡ https://developer.nvidia.com/embedded/support
A copy may also be obtained directly from NVIDIA GmbH (Floessergasse 2, 81369 Munich, Germany).
This device operates in the following frequency bands and maximum transmitted power:
| ድግግሞሽ ባንድ | EIRP (ዲቢኤም) | ኢአርፒ (ኤም.ኤም.ደብሊው) |
| 2402 – 2480 MHz (Bluetooth) | 11.54 | 14 |
| 2412 - 2472 ሜኸ | 20 | 100 |
| 5180 - 5320 ሜኸ | 23 | 200 |
| 5500 - 5700 ሜኸ | 23 | 200 |
| 5745 - 5825 ሜኸ | 14 | 25 |
ማስጠንቀቂያ
- Operation in 5150 – 5350 MHz frequency band is restricted to indoor use.
- ይህ መሳሪያ በራዲያተሩ እና በሰውነትዎ መካከል ቢያንስ 20 ሴ.ሜ ርቀት ላይ መጫን እና መስራት አለበት።
- Use antennas with the same Type and Gain for this device.
- በዚህ መሳሪያ ላይ የሚደረጉ ማናቸውም ማሻሻያዎች፣ በአምራቹ በግልጽ ያልፀደቁ፣ መሳሪያውን ለመስራት የተጠቃሚውን ስልጣን ባዶ ያደርገዋል።
- Hardware Version: 945-82771-0005-000
- Firmware Version: 7.35.221.11 (WLAN); 030A0525 (Bluetooth)
አውስትራሊያ እና ኒውዚላንድ
- የአውስትራሊያ ኮሙዩኒኬሽን እና ሚዲያ ባለስልጣን (RCM)
- This product meets the applicable EMC requirements for Class B, I.T.E equipment and applicable radio equipment requirements.
ጃፓን
የጣልቃ ገብነት ቁጥጥር ምክር ቤት (VCCI)
Radio/ Telecommunications Certification
- ደቡብ ኮሪያ
የሬዲዮ ምርምር ኤጀንሲ (RRA)
Korean Agency for Technology and Standards (KATS) - ቻይና
State Radio Regulations Committee
CMIIT ID: 2015AJ7078 - ስንጋፖር
Info-Communications Development Authority of Singapore
Environmental Disclosures
- California Prop 65 Warning – California law requires this warning to be provided to California customers.
- Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
China/Taiwan RoHS Material Content Declaration
| Declaration of the presence condition of the Restricted Marking | ||||||
| Jetson TX2 Developer Kit Equipment Name: Jetson TX2 Developer Kit | ||||||
| ክፍሎች | የተከለከሉ ንጥረ ነገሮች እና ኬሚካላዊ ምልክቶቹ | |||||
| (ፒቢ) | (ኤችጂ) | (ሲዲ) | (ክሪ (VI)) | (ፒቢቢ) | (ፒቢዲ) | |
| PCA | – | O | O | O | O | O |
| ፕሮሰሰር | O | O | O | O | O | O |
| የስርዓት ማህደረ ትውስታ | – | O | O | O | O | O |
| የኃይል አስማሚ | – | O | O | O | O | O |
| የካሜራ ሞጁል | – | O | O | O | O | O |
| አንቴና | – | O | O | O | O | O |
| መካኒካል | – | O | O | O | O | O |
| ኬብሎች / ማገናኛዎች | – | O | O | O | O | O |
| የሚሸጥ ቁሳቁስ | O | O | O | O | O | O |
| Flux፣ Solder Paste፣ መለያ እና ሌሎች የፍጆታ ቁሳቁሶች | O | O | O | O | O | O |
All parts named in this table with a “-” are in compliance with the European Union’s RoHS Legislation. |
||||||
ማስታወሻ፡- The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product, such as temperature and humidity.
ማስታወቂያ
© 2017-2019 NVIDIA Corporation. All rights reserved. NVIDIA, the NVIDIA logo, Tegra, Jetson, and JetPack are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and other countries. Other company and product names may be trademarks of the respective companies with which they are associated. ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILEኤስ፣ ስዕሎች፣ ምርመራዎች፣ ዝርዝሮች እና ሌሎች ሰነዶች (በአንድነት እና በተናጠል፣ “ቁሳቁሶች”) “እንደሆነ” እየቀረቡ ነው። NVIDIA ምንም አይነት ዋስትናዎች ፣ መግለጫዎች ፣ የተዘበራረቀ ፣ ህጋዊ ወይም በሌላ መልኩ ከቁሳቁሶች ጋር እና ሁሉንም ግልጽ ወይም ግልጽ ሁኔታዎችን ፣ ውክልናዎችን እና ዋስትናዎችን ፣ ማንኛውንም የተዘዋዋሪ የዋስትና ርእሶችን ጨምሮ አጥጋቢ ጥራት፣ ለልዩ ዓላማ የአካል ብቃት እና ያለመብት ጥሰት፣ በዚህ ህግ ከተፈቀደው ከፍተኛው መጠን ተገለሉ።
የቀረበው መረጃ ትክክለኛ እና አስተማማኝ ነው ተብሎ ይታመናል. ሆኖም የNVDIA ኮርፖሬሽን እንደዚህ አይነት መረጃን መጠቀም ለሚያስከትለው መዘዝ ወይም ማንኛውም የፈጠራ ባለቤትነት ወይም ሌሎች የሶስተኛ ወገኖች መብቶች መጣስ ምንም አይነት ሃላፊነት አይወስድም። በማንኛውም የNVDIA ኮርፖሬሽን የፓተንት ወይም የባለቤትነት መብቶች ስር ምንም ፍቃድ በአንድምታ ወይም በሌላ መንገድ አይሰጥም። በዚህ ህትመት ውስጥ የተጠቀሱት ዝርዝሮች ያለማሳወቂያ ሊለወጡ ይችላሉ. ይህ እትም ከዚህ ቀደም የቀረቡትን ሁሉንም መረጃዎች ይተካዋል እና ይተካል። የNVDIA ኮርፖሬሽን ምርቶች የNVDIA ኮርፖሬሽን ፈጣን የጽሁፍ ፍቃድ ሳይኖራቸው በህይወት ድጋፍ መሳሪያዎች ወይም ስርዓቶች ውስጥ እንደ ወሳኝ አካላት እንዲጠቀሙ አይፈቀድላቸውም።
የንግድ ምልክቶች
NVIDIA and the NVIDIA logo are trademarks or registered trademarks of NVIDIA Corporation in the United States and other countries. Other company and product names may be trademarks of the respective companies with which they are associated.
በተደጋጋሚ የሚጠየቁ ጥያቄዎች
What is the purpose of JetPack?
JetPack is essential software required for using the NVIDIA Jetson platform, providing necessary tools and libraries for development.
How can I identify the carrier board revision of my developer kit?
The user guide contains information on identifying different carrier board revisions based on specific features and enhancements.
ሰነዶች / መርጃዎች
 |
NVIDIA TX2 Jetson Developer Kit [pdf] የተጠቃሚ መመሪያ P3310, P2597, TX2 Jetson Developer Kit, TX2, Jetson Developer Kit, Developer Kit, Kit |