PIZZELLO አራት ማዕዘን ቅርጽ ያለው የምግብ ጠረጴዛ መመሪያ መመሪያ

ደረጃ 1፡ Connect panel E and panel D using screw G and nut N. Ensure correct connection by checking for 4 silver screw heads in the middle of the table.
ደረጃ 2፡ Assemble parts C, Cupright, F, and L screws as instructed.
ደረጃ 3፡ Continue assembling part F with part B using L screws.
ደረጃ 4፡ Attach the connected B and C parts to the tabletop using screw J.
ደረጃ 5፡ Connect part A with parts B and C using screws J and H. Secure with screw H from the inside.

Patio Bistro Chair

Follow the labeled legs for the front side indication
Assemble on a flat surface to avoid scratches
Do not dispose of the original box until you confirm the product
Contact after-sales service for product return

መግቢያ

Thank you for choosing our rectangular dining table! This table is designed for durability, weather resistance, and low maintenance, making it a great addition to both indoor and outdoor spaces.
To ensure long-lasting use and maintain its quality, please read and follow the usage precautions below.

የአጠቃቀም ጥንቃቄዎች

ትኩረት

የሙቀት መቋቋም; The table can withstand temperatures between -104℉ to -140℉ (-40℃to -60℃）. Avoid placing high-temperature objects (such as grills or hot pots) directly on the surface to prevent damage. Using heat-resistant mats is recommended.
ለረጅም ጊዜ የፀሐይ መጋለጥን ያስወግዱ; While our table is weather-resistant, extended exposure to strong sunlight may cause fading or slight warping. Covering the table with a cloth or protective cover when not in use is advised.
መከላከል ጭረቶች፡ Avoid using sharp objects such as knives directly on the table surface to prevent scratches.

መሣሪያዎች ያስፈልጋሉ።

የስብሰባ ፍላጎት

ክፍሎች ዝርዝር

የስብሰባ መመሪያ

ደረጃ 1
- Use screw G and nut N to connect panel E and panel D.
- ማስታወሻ፡- If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
- Please check it before installing.
- A) If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
- B) If part E is incorrectly connected, you will see the 4 silver screw heads on the side of the table, and you will have a problem on the next step.
ደረጃ 2
1. Stand parts C and Cupright at a 90-degree angle to the ground or easier installation.
2. Insert one end of part F into part C, align the holes, and secure it with two L screws.
ደረጃ 3
- Insert the other end of part F into part B, align the holes, and secure it with two L screws
ደረጃ 4
- Attach the connected B and C parts to the tabletop using screw J.
ደረጃ 5
- Use screws J and H to connect part 2 (A) parts with parts B and C.
- (Secure with screw H from the inside)
- Secure with screw H from the inside

PATIO BISTRO CHAIR

ውድ ደንበኛ፣

የእኛን ምርት ስለመረጡ እናመሰግናለን። እባክዎን ምርቱን ከመገጣጠምዎ ወይም ከመጠቀምዎ በፊት ይህንን መመሪያ በጥንቃቄ ያንብቡ, ተገቢ ባልሆነ አጠቃቀም ምክንያት የሚደርስ ጉዳትን ለማስወገድ.
ምርቱ ለሶስተኛ ወገኖች ከተላለፈ, ይህ መመሪያ ከምርቱ ጋር አብሮ መተላለፍ አለበት. ለማንኛውም ጥያቄዎች እኛን ለማነጋገር አያመንቱ።

መሣሪያዎች ያስፈልጋሉ።

የስብሰባ ፍላጎት

ክፍል ዝርዝር

Fasten screws loosely during initial assembly. Do not ﬁrmly tighten screws until step 7.

የመሰብሰቢያ መመሪያዎች

ጠቃሚ ምክሮች We have labeled the legs to indicate which side is the front side.
However, the factory sometimes mislabeled them. Please check with the picture before installing; the straighter side should be the front side.

ትኩረት

When installing, we suggest you can assemble the product on the ﬂat carton which comes with the product, or any other clean ﬂoor to avoid the product surface being scratched.
Please do not dispose of the original product box until you conﬁrm you received the complete and correct item.
If you want to return the product, you are suggested to contact our after-sales service ﬁrst. You need to pack the returned product with the original box and then follow the steps to return it.
ደረጃ 1: Connect the beam (E) and the left front leg (A). Use the screw (G) and nut (F) to connect them.
Please don’t tighten the screws yet.
ደረጃ 2: Connect the beam (E) andthe Right Front Leg (B). Use the screw (G) and nut (F) to connect them.
Please don’t tighten the screws yet.
ደረጃ 3: Attach the chair seat (C) to the Left Front Leg (A) and the Right Front Leg (B).
Please make sure you attach the seat from the correct direction.
ደረጃ 4፡ Use the 4 scresw (G) and 4 nuts (F) to connect them.
ደረጃ 5: Remove the 2 protective cases on the seat (C).
ደረጃ 6: Assert the seat back (D) to the seat (C).
ደረጃ 7: ሁሉንም ዊንጮችን እና ፍሬዎችን በጥብቅ ይዝጉ።

How To Replace The Back And Seat

A: Slowly take apart the back of the back frame.
B) Slowly take apart the seat from the seat frame.
ማስታወሻ፡- When replacing the new seat and back, make sure you assemble them from the correct direction. The edge with round angle should face outside.

የሚጠየቁ ጥያቄዎች

የመመገቢያ ጠረጴዛውን ከቤት ውጭ መጠቀም እችላለሁ?

Yes, the table is designed for both indoor and outdoor use. It is weather-resistant.

What is the weight capacity of the patio bistro chair?

ወንበሩ 265 ፓውንድ የክብደት አቅም አለው.

ሰነዶች / መርጃዎች

PIZZELLO Rectangular Dining Table [pdf] መመሪያ መመሪያ
Rectangular Dining Table, Rectangular Table, Dining Table

ዋቢዎች

የተጠቃሚ መመሪያ

PIZZELLO Rectangular Dining Table

ዝርዝሮች

የምርት አጠቃቀም መመሪያዎች

የክፍሎች ዝርዝር፡

የሚያስፈልጉ መሳሪያዎች፡-