QANBA RUBY Arcade Controller Instruction Manual

QANBA RUBY Arcade Controller

አፈ ታሪክ

1. የተኳኋኝነት መቀየሪያ
2. ቀይርን ጠቅ ያድርጉ
3. ሁነታ ቀይር
4. የኃይል አመልካች
5. መነሻ አዝራር
6. የዩኤስቢ-ሲ ገመድ ወደብ
7. ቱርቦ LED
8. MF LED
9. የቱርቦ ቁልፍ
10. ኤምኤፍኤፍ ቁልፍ
11. ተመለስ አዝራር
12. የጀምር አዝራር
13. የድርጊት አዝራሮች
14. የዩኤስቢ ዶንግል
15. ዳግም አስጀምር አዝራር

የምርት አሠራር

Connecting to Host Devices

Connect to a PC, mobile phone, or other devices

ባለገመድ ግንኙነት

• መሣሪያው መብራቱን ያረጋግጡ።
• Connect the USB-C cable (A) to the device (the R1 power indicator will light up).
• Use the Compatibility Switch (1) to select Xinput (default), Android, or Dinput mode.

Connecting to Host Devices

Connect to a PC, mobile phone, or other devices

የገመድ አልባ ግንኙነት

• መሣሪያው መብራቱን ያረጋግጡ።
• Insert the USB Dongle (14) into the device.
• Use the Compatibility Switch (1) to select Xinput (default), Android, or Dinput mode.
• Press the Home Button (5) to power on and reconnect to the USB Dongle.
  • Smart TV / PC / Laptop / Tablet / Mobile Phone / TV Box
  • ተራ ተንቀሳቃሽ
  • PC
  • Smart TV/PC/ Laptop/Tablet
  • TV inteligente/PC

Repairing the Controller with the USB Dongle

• If the connection is lost or the USB Dongle (14) is replaced, press and hold USB Dongle button (B) on the USB Dongle (14) and insert it into the USB port of the host device.
• After removing the USB Dongle (14), reinsert it into the USB port of the host device without pressing USB Dongle button (B) again to complete pairing with the powered-on Ruby controller.

ማስታወሻ፡-
If the Ruby controller does not need to be paired with the USB Dongle (14) again, do not press and hold the USB Dongle button (B) on the USB Dongle (14) when plugging in or removing the receiver.

መሣሪያውን ያገናኙ

የኃይል LED

የዩኤስቢ ገመድ ግንኙነት

• Connect the USB Type‑C to USB Type‑A cable (A) to the USB-C cable port (6) for power. The power indicator (4) will light up.
• When the battery is low, the power indicator (4) flashes slowly to indicate charging after connecting the USB Type‑C to USB Type‑A cable (A) to the USB-C cable port (6) for power. The indicator remains solid once fully charged.

2.4G ገመድ አልባ ግንኙነት ሁነታ

• Press the HOME button (5) to power on and start searching. The power indicator (4) will flash. Once pairing with the USB Dongle (14) is successful, the indicator will remain solid.
• When using the R1 device, the power indicator (4) will flash to indicate a low battery and that charging is required.

ማስታወሻ፡- Do not connect the USB cable in 2.4G wireless mode; otherwise, the device will switch to USB cable mode by default. The device will automatically power off if no connection is made within 2 minutes of turning on, or if there is no operation within 10 minutes after a successful connection.

USB Dongle (14) Indicator

In 2.4G wireless connection mode: 

• The indicator on the USB Dongle (14) flashes while searching and stays lit when pairing is successful.
• The indicator is off when the USB Dongle (14) is not paired.

RESET Button (15)

1. Press the RESET button (15) to power on the device.
2. Press the RESET button (15) to restore the Ruby controller from update mode to normal controller mode.

BACK/C Mode Selection

• When the Click switch (2) is set to the Back position, the Back button (11) is enabled (default), and the Action Button C (13) is disabled.
• When the Click switch (2) is set to the C position, the Action Button C (13) is enabled, and the Back button (11) is disabled.

MODE (Joystick Direction Mode Selection)

• When the mode switch (3) is set to the DP position, D-Pad (DP) mode is enabled (default).
• When the mode switch (3) is set to the LS position, Left Stick (LS) mode is enabled.

ማስታወሻ፡- Some retro emulators only support the LS function. If the joystick does not respond, please switch the direction mode.

TURBO አዝራር

• Each of the A/B/X/Y/R1/L1/R2/L2/R3/L3 action buttons (13) can be switched among three turbo modes:
• Turbo Off (default) – LED (7) Off
• Press Turbo – LED (7) flashes red while the button is pressed
• Auto Turbo – LED (7) flashes continuously
• Press and hold the TURBO button (9) together with one or more action buttons (13), then release to cycle through the three turbo modes.

ማስታወሻ

• The ▲/▼/◀/▶ directional buttons cannot be set to the turbo function.
• The turbo function has no memory. All turbo settings will be cleared automatically when the USB wired connection is disconnected or the device is powered off wirelessly.

ኤምኤፍኤፍ ቁልፍ

• With the MF LED (8) off (factory default), the four directional buttons operate in center‑reset mode:
• Press ◀ and ▶ (13) at the same time to reset to the center.
• Press ▲ and ▼ (13) at the same time to reset to the center.
• Press the MF button (10) to turn on the MF LED (8). The four directional buttons will switch to last‑input priority mode:
• The later‑pressed ◀/▶ or ▲/▼ directional button (13) overrides the earlier‑held one.
• Hold ▶ then press ◀: output is ◀.
• Hold ◀ then press ▶: output is ▶.
• Hold ▼ then press ▲: output is ▲.
• Hold ▲ then press ▼: output is ▼.
  • ማስታወሻ፡- MF settings are not saved. After disconnecting the USB cable or entering 2.4G sleep mode, the device will automatically return to the default center‑reset mode with the MF indicator off..

ኦፕሬሽን

• የምርት ስም
  
  • QANBA RUBY Arcade Controller
• ሞዴል
  
  • R1
• የማይክሮ ስዊች
  
  • ዝቅተኛ-ፕሮfile silent switches
• መጠኖች
  
  • 330 ሚሜ x 226 ሚሜ x 23 ሚሜ / 13.0 በ x 8.9 በ x 0.9 ኢንች
• ክብደት
  
  • 0.81 ኪ.ግ / 1.79 ፓውንድ
• የዩኤስቢ ገመድ ርዝመት
  • 2 ሜ / 6.56 ጫማ

የመሙያ መመሪያዎች

• Charge via the USB port on a computer, or use the wired mode to charge while playing.
• Use a standard charger with 5V, 1–2A output.

ተገዢነት

This product complies with the following regulatory information and safety tests:

• ዩኤስቢ 2.0 የሚያከብር
• FCC፡ ይህ መሳሪያ የFCC ደንቦች ክፍል 15ን ያከብራል። ክዋኔው በሚከተሉት ሁለት ሁኔታዎች ተገዢ ነው.

1. ይህ መሳሪያ ጎጂ ጣልቃገብነትን ላያመጣ ይችላል።
2. ይህ መሳሪያ ያልተፈለገ ስራን የሚያስከትል ጣልቃገብነትን ጨምሮ የደረሰውን ማንኛውንም ጣልቃ ገብነት መቀበል አለበት።

ማስጠንቀቂያዎች፣ ደህንነት እና ዋስትና

• ይህንን መመሪያ በጥንቃቄ ያንብቡ።
• Do not use alcohol or liquids to clean this product; use a dry cloth instead.
• Do not disassemble the interior.
• When not in use, unplug this product and store the USB cable to prevent tripping hazards.
• This product in a cool, dry place away from liquids, fumes, and chemicals.
• Do not leave this product in hot climates, such as in the trunk of a car, for a long time on a hot summer day.
• Do not stack other items on top of this product.
• Commercial use of this prcduct is prohibited.
• The design and specifications of this product are subject to change without prior notice.
• The pr«luct is not suitable for children under 12 years old.
• እባክዎ ይህን መመሪያ በቀላሉ ለማጣቀሻ ያቆዩት።
• QANBA CN TECH will repair or replace prcxluct at its discretion 12 months from purchase date.

የደንበኛ ድጋፍ

• ስልክ፡ +86 755 29171459
• ኢሜይል፡- info@qanba.com

የኤፍ.ሲ.ሲ መግለጫ

ይህ መሳሪያ የFCC ደንቦች ክፍል 15ን ያከብራል። ክዋኔው በሚከተሉት ሁለት ሁኔታዎች ተገዢ ነው፡ (1) ይህ መሳሪያ ጎጂ ጣልቃገብነት ላያመጣ ይችላል እና (2) ይህ መሳሪያ ያልተፈለገ አሰራርን የሚያስከትል ጣልቃ ገብነትን ጨምሮ የደረሰውን ማንኛውንም ጣልቃ ገብነት መቀበል አለበት። ማናቸውንም ለውጦች ወይም ማሻሻያዎች ለማክበር ኃላፊነት ባለው አካል ያልጸደቀው የተጠቃሚውን መሳሪያ የማንቀሳቀስ ስልጣንን ሊያሳጣው ይችላል።

ማስታወሻ፡- በFCC ሕጎች ክፍል 15 መሠረት ይህ መሣሪያ ለክፍል B ዲጂታል መሣሪያ ተፈትኖ እና ገደብን የሚያከብር ሆኖ ተገኝቷል። እነዚህ ወሰኖች የተነደፉት በመኖሪያ ተከላ ውስጥ ካለው ጎጂ ጣልቃገብነት ምክንያታዊ ጥበቃን ለመስጠት ነው። ይህ መሳሪያ የሬድዮ ፍሪኩዌንሲ ሃይልን ያመነጫል፣ ይጠቀማል እና ሊያሰራጭ ይችላል፣ እና ካልተጫነ እና በመመሪያው መሰረት ጥቅም ላይ ካልዋለ በሬዲዮ ግንኙነቶች ላይ ጎጂ ጣልቃገብነት ያስከትላል። ነገር ግን, በአንድ የተወሰነ መጫኛ ውስጥ ጣልቃገብነት ላለመከሰቱ ምንም ዋስትና የለም. ይህ መሳሪያ በሬዲዮ ወይም በቴሌቭዥን መስተንግዶ ላይ ጎጂ ጣልቃገብነት የሚያስከትል ከሆነ መሳሪያውን በማጥፋት እና በማብራት ሊታወቅ የሚችል ከሆነ ተጠቃሚው ከሚከተሉት እርምጃዎች በአንዱ ወይም ከዚያ በላይ በሆነ መልኩ ጣልቃ ገብነትን ለማስተካከል እንዲሞክር ይበረታታል።

• የመቀበያ አንቴናውን አቅጣጫ ቀይር ወይም ወደ ሌላ ቦታ ቀይር።
• በመሳሪያው እና በተቀባዩ መካከል ያለውን ልዩነት ይጨምሩ.
• መሳሪያውን ተቀባዩ ከተገናኘበት በተለየ ወረዳ ላይ ወደ መውጫው ያገናኙ.
• ለእርዳታ ሻጩን ወይም ልምድ ያለው የሬዲዮ/ቲቪ ቴክኒሻን አማክር።

መሣሪያው አጠቃላይ የ RF መጋለጥ መስፈርትን ለማሟላት ተገምግሟል። መሳሪያው ያለ ገደብ በተንቀሳቃሽ መጋለጥ ሁኔታዎች ውስጥ መጠቀም ይቻላል.

መላ መፈለግ

• መቆጣጠሪያው በገመድ አልባ ግንኙነት ላይ አይገናኝም; Ensure the USB Dongle (14) is properly plugged into the host device. If the controller was previously paired, try re-pairing it by pressing the USB Dongle button (B) on the dongle.
• ተቆጣጣሪው ምላሽ አይሰጥም፡- Check if the controller is powered on (press the RESET button 15). If using wirelessly, ensure the battery is charged. If using a USB cable, ensure it’s securely connected.
• Joystick not working in an emulator: Try switching the joystick direction mode between D-Pad (DP) and Left Stick (LS) using the MODE switch. Some emulators only support one mode.
• የቱርቦ ተግባር አይሰራም፦ Ensure you are not trying to set turbo on directional buttons. Remember that turbo settings are cleared upon disconnection or power off.
• Controller powers off automatically: The device will automatically power off if no connection is made within 2 minutes of turning on, or if there is no operation within 10 minutes after a successful connection. Reconnect or press a button to wake it up.