TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

ዝርዝሮች

• ሞዴል፡ ጥ 103
• ተኳኋኝነት Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• ግንኙነት፡ Bluetooth, 2.4G Wireless, USB (Type-C)
• የሥራ ጥራዝtage: ዲሲ 3.7 ቪ
• በአሁኑ ጊዜ የሚሰራ፡ <30mA
• የእንቅልፍ ጊዜ: < 5uA
• ኃይል መሙላት Voltagኢ/የአሁን፡ ዲሲ 5V/500mA

መላ መፈለግ

• መቆጣጠሪያው እየተገናኘ አይደለም፦
  • ተቆጣጣሪው ሙሉ በሙሉ መሙላቱን ያረጋግጡ።
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • በመሳሪያዎ ላይ ብሉቱዝ መንቃቱን ያረጋግጡ።
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• ምላሽ የማይሰጡ አዝራሮች፡-
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• የግቤት መዘግየት፡-
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • ከሌሎች የገመድ አልባ መሳሪያዎች ጣልቃገብነት ይቀንሱ።
  • Try connecting via USB cable if available.
• ተቆጣጣሪው ኃይል እየሞላ አይደለም;
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • የተለየ ዓይነት-C ገመድ ወይም የኃይል አስማሚ ይሞክሩ።
  • The LED indicator should show the charging status.

Q103 ተግባራዊ ንድፍ

1. D-pad አዝራር
2. X/Y/A/B አዝራር
3. HOME Reconnect/Power Button
4. ጥንድ ቁልፍ
5. አዝራር ይምረጡ
6. TURBO አዝራር
7. የግራ ጆይስቲክ/ኤል 3 አዝራር
8. የቀኝ ጆይስቲክ/R3 አዝራር
9. ግልጽ አዝራር
10. የጀምር አዝራር
11. ኤል ቁልፍ
12. L2 አዝራር
13. ዓይነት-ሲ ባትሪ መሙያ ወደብ
14. R2 ቁልፍ
15. አር ቁልፍ
16. ጉድጓድ ዳግም አስጀምር
17. LED
18. ሁነታ ቀይር

Android / iOS / Windows/QUBE
አንድሮይድ 9.0 / iOS 13.0 / Win 10 እና ከዚያ በላይ

የብሉቱዝ ግንኙነት

1. ማብሪያና ማጥፊያውን ገልብጥ፡ ወደ X ቀይር ወደ X- INPUT ሁነታ።
2. መጀመሪያ ጥቅም ላይ የዋለ (የኃይል ማጣመር)
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • እንደገና ማገናኘት ሲሳካ LED ሁልጊዜ ቀይ ነው.
3. እንደገና ተጠቀም (ዳግም ግንኙነት)፦
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. እንደገና ማገናኘት ሲሳካ LED ሁልጊዜ ቀይ ነው.
4. Press the PAIR button to power off the device.

ቀይር ሁነታ

የብሉቱዝ ግንኙነት

1. ማብሪያ / ማጥፊያውን ገልብጥ፡ ወደ ስዊች ሁነታ ቀይር።
2. መጀመሪያ ጥቅም ላይ የዋለ (የኃይል ማጣመር)
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   እንደገና መገናኘት ሲሳካ LED ሁልጊዜ አረንጓዴ ነው.
3. እንደገና ተጠቀም (ዳግም ግንኙነት)፦
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus ለአንድሮይድ

አንድሮይድ 9.0 እና ከዚያ በላይ

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. መጀመሪያ ጥቅም ላይ የዋለ (የኃይል ማጣመር)
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  እንደገና ተጠቀም (ዳግም ግንኙነት)፦
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. መሳሪያውን ለማጥፋት ጥንድ አዝራሩን ይጫኑ።

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Firmware ማሻሻል

1. ቪን ያገናኙ file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

የጆይስቲክ ቅንብሮች

• የሮከር መለኪያ
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

የኤሌክትሪክ መለኪያዎች

• የሥራ ጥራዝtagሠ: DC3.7V
• የአሁን ሥራ: <30mA
• ወቅታዊ የእንቅልፍ ጊዜ፡< 5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• የመጠባበቂያ ጊዜ፡ 30 ቀናት (ሙሉ በሙሉ ተሞልቷል)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. የእንቅልፍ / የመቀስቀስ ተግባር;
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

የFCC ማስጠንቀቂያ

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• የመቀበያ አንቴናውን አቅጣጫ ቀይር ወይም ወደ ሌላ ቦታ ቀይር።
• በመሳሪያው እና በተቀባዩ መካከል ያለውን ልዩነት ይጨምሩ.
• መሳሪያውን ተቀባዩ ከተገናኘበት በተለየ ወረዳ ላይ ወደ መውጫው ያገናኙ.
• ለእርዳታ ሻጩን ወይም ልምድ ያለው የሬዲዮ/ቲቪ ቴክኒሻን አማክር።

ጥንቃቄ፡- በዚህ መሳሪያ ላይ የሚደረጉ ማንኛቸውም ለውጦች ወይም ማሻሻያዎች በአምራቹ በግልፅ ያልፀደቁ ይህንን መሳሪያ የማስተዳደር ስልጣንዎን ሊያሳጡ ይችላሉ።
ይህ መሳሪያ የFCC ደንቦችን ክፍል 15 ያከብራል። ክዋኔው በሚከተሉት ሁለት ሁኔታዎች ተገዢ ነው.

1. ይህ መሳሪያ ጎጂ ጣልቃገብነትን ላያመጣ ይችላል እና
2. ይህ መሳሪያ ያልተፈለገ ስራን የሚያስከትል ጣልቃገብነትን ጨምሮ የደረሰውን ማንኛውንም ጣልቃ ገብነት መቀበል አለበት።

ይህ መሳሪያ ቁጥጥር ለሌለው አካባቢ የተቀመጡትን የ FCC የጨረር መጋለጥ ገደቦችን ያከብራል። ይህ መሳሪያ በራዲያተሩ እና በሰውነትዎ መካከል ቢያንስ 0 ሴ.ሜ ርቀት ላይ መጫን እና መስራት አለበት።